Dell PowerVault MD3200i Owner's Manual page 249

• The node name and the RAID level
• The node name and the virtual disk capacity
To find nodes:
1 In the AMW, select View Find.
2 Based on the type of search, select one of these options, and go to the
indicated step:
• Search by name – see step 3.
• Search by special criteria – see step 4.
3 Type the name of the node to be found in Find Node. See step 8.
4 Based on the search criteria, select one of these options, and go to the
indicated step:
• Find all virtual disks with RAID level—Go to step 5.
• Find all virtual disks with capacity—Go to step 6.
• Find all free capacity nodes—Go to step 7.
5 To search for all nodes based on their RAID level, perform these steps:
Select Find all virtual disks with RAID level.
a
Select the RAID level from the list.
b
Go to step 8.
c
6 To search for all nodes based on their virtual disk capacity, perform these
steps:
Select Find all virtual disks with capacity.
a
Type the capacity in the GB box.
b
Specify that the capacity to be matched is less than, equal to, or
c
greater than the capacity entered in the GB box.
Go to step 8.
d
7 To search for all Free Capacity nodes with a particular capacity, perform
these steps:
NOTE:
selected or from the Mappings tab. You must cancel the selection of the
Search by name option to use this option.
Select Find all free capacity nodes.
a
This option is not available when the Search by name option is
Troubleshooting: Your Storage Array Software
249