Using Go To - Dell PowerVault MD3200i Owner's Manual

Type the capacity in the GB box.
b
Specify that the free capacity to be matched is less than, equal to, or
c
greater than the capacity entered in the GB box.
Go to step 8.
d
8 Click Find Next.
To see every node that matches the criteria, click Find Next repeatedly. If
no matches are found, the Search Failed dialog is displayed. Click OK, and
re-enter the search criteria.
9 To close the dialog, click Cancel.
To continue searching for nodes with the same criteria after the Find
dialog is closed, press <F3>.

Using Go To

Use the Go To option to quickly jump to an associated snapshot repository
virtual disk, snapshot virtual disk, source virtual disk, or target virtual disk.
These virtual disks are displayed in the Logical pane of the Logical tab.
The Go To option is available only if the Snapshot premium feature or the
Virtual Disk Copy premium feature is enabled or if snapshot virtual disks or
virtual disk copies currently exist on the storage array. The Go To option is
not accessible from the Mappings tab of the AMW.
1 On the Logical tab of the AMW, select one of these virtual disks, and go to
the indicated step:
• Snapshot virtual disk—Go to step 2.
• Snapshot repository virtual disk—Go to step 3.
• Source virtual disk—Go to step 4.
• Target virtual disk—Go to step 5.
2 Select View Go To Snapshot Virtual Disk.
The selection jumps to the associated snapshot virtual disk in the Logical
pane.
3 Select View Go To Snapshot Repository Virtual Disk.
The selection jumps to the associated snapshot repository virtual disk in
the Logical pane.
250
Troubleshooting: Your Storage Array Software