Dell PowerVault MD3200i Owner's Manual page 205

Storage arrays
Hide thumbs Also See for PowerVault MD3200i:
Table of Contents

Advertisement

2 Select Advanced Maintenance Download RAID Controller
Module NVSRAM
or
Select the Support tab, and click Download Firmware. In Select download
task, select Download RAID controller module NVSRAM and click OK.
An error message is displayed. Click OK to close it and select a compatible
file.
3 To locate the directory in which the file to download resides, click Select
File.
4 Select the file to download in the File selection area and click OK.
By default, only downloadable files that are compatible with the current
storage array configuration are displayed.
When you select a file in the File selection area, applicable attributes (if
any) of the file are displayed in the NVSRAM File information area. The
attributes indicate the version of the NVSRAM file.
5 Click Transfer.
NOTE:
If the file selected is not valid or is not compatible with the current
storage array configuration, the File Selection Error dialog is displayed. Click
OK to close it, and choose a compatible NVSRAM file.
6 Click Yes in the Confirm Download dialog.
The download starts.
7 Perform one of these actions:
Select Tools Upgrade RAID Controller Module Firmware.
Select the Setup tab, and click Upgrade RAID Controller Module
Firmware.
The Upgrade RAID Controller Module Firmware window is displayed.
The Storage array pane lists the storage arrays. The Details pane shows the
details of the storage array that is selected in the Storage array pane.
8 In the Storage array pane, select the storage array for which you want to
download the NVSRAM firmware.
You can select more than one storage array.
Management: Firmware Downloads
205

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault md3220i

Table of Contents