Dell PowerVault MD3200i Owner's Manual page 241

Storage arrays
Hide thumbs Also See for PowerVault MD3200i:
Table of Contents

Advertisement

In the Table view, every managed storage array is listed once, regardless of the
number of attachments it has in the Tree view. After the storage array is
contacted by MDSM, an icon representing its hardware status is displayed.
Hardware status can be Optimal, Needs Attention, or Fixing. If, however, all
of the network management connections from the storage management
station to the storage array shown in the Tree view are Unresponsive, the
storage array status is represented as Unresponsive.
In the EMW Status Bar and the AMW Status Bar, the icons also have these
behaviors:
Hold the mouse over the icon in the EMW Status Bar and the AMW
Status Bar to display a tooltip with a brief description of the status.
The icons for the Needs Attention status and Unresponsive status are
displayed in EMW Status Bar and the AMW Status Bar if there are
discovered storage arrays with either condition.
The EMW Tree view has additional status icons that are shown in the
following table.
Table 19-3. Additional Status Icons
Status
Unsupported Alerts
with a Needs
Upgrade Status
Alert Set
Setting an Alert at
the Parent Node
Level
Icon
Description
Setting an alert on a s storage array with a Needs
Upgrade status is not supported. In this case, the
storage array shows both a Needs Upgrade status
and an Unsupported Alerts icon in the Tree view.
The Unsupported Alerts icon indicates that the
storage array cannot be monitored.
If you installed the Event Monitor with MDSM,
and if you have set alerts, the Alert Set icon is
displayed next to the storage array status in the
Tree view for which the alerts are set.
You can set alerts at any of the nodes in the Tree
view. Setting an alert at a parent node level, such
as at a host level, sets alert fir any child nodes. If
you set an alert at a parent node level and any of
the in-band storage array child nodes have a
Needs Upgrade status, the Alert Disables status
icon is displayed next to the parent node in the
tree view.
Troubleshooting: Your Storage Array Software
241

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault md3220i

Table of Contents