Netbios Filter Configuration - ZyXEL Communications ZYWALL 10W User Manual

NAME
WAN to DMZ This field displays whether NetBIOS packets are blocked or forwarded
from the WAN to the DMZ.
DMZ to LAN This field displays whether NetBIOS packets are blocked or forwarded
from the DMZ to the LAN.
DMZ to WAN This field displays whether NetBIOS packets are blocked or forwarded
from the DMZ to the WAN.
IPSec This field displays whether NetBIOS packets sent through a VPN
Packets connection are blocked or forwarded.
Trigger dial This field displays whether NetBIOS packets are allowed to initiate
calls. Disabled means that NetBIOS packets are blocked from initiating
calls.

NetBIOS Filter Configuration

Syntax: sys filter netbios config <type> <on|off>
where
Identify which NetBIOS filter (numbered 0-3) to configure.
<type> =
0 = LAN to WAN
1 = WAN to LAN
2 =LAN to DMZ
3 = WAN to DMZ
4 = DMZ to LAN
5 = DMZ to WAN
6 = IPSec packet pass through
7 = Trigger Dial
NetBIOS Filter Commands
Chart O-1 NetBIOS Filter Default Settings
DESCRIPTION
ZyWALL 10~100 Series Internet Security Gateway
EXAMPLE
Forward
Forward
Forward
Forward
Disabled
65