ZyXEL Communications ZYWALL 10W User Manual page 116

ZyWALL 10~100 Series Internet Security Gateway
FIELD
Encapsulation
Service Type
Note: DSL users must choose the Standard option only. The My Login, My Password and Login
Server fields are not applicable in this case.
My Login
My Password
Login Server
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
Network Address
Translation
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
9.1.2 PPTP Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of data from a
remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-based networks.
PPTP supports on-demand, multi-protocol and virtual private networking over public networks, such as the
Internet.
9-2
Table 9-1 Menu 4: Internet Access Setup Menu Fields
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for the IP Address field.
Press [SPACE BAR] and then [ENTER] to select Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method) or RR-Telstra. Choose a RoadRunner flavor if
your ISP is Time Warner's RoadRunner; otherwise choose Standard.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it does
not, then you must enter the authentication server IP address.
If your ISP did not assign you a fixed IP address, press [SPACE BAR] and then
[ENTER] to select Dynamic, otherwise select Static and enter the IP address and
subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (static IP address
Assignment is selected in the previous field).
Enter the subnet mask associated with your static IP.
Enter the gateway IP address associated with your static IP.
Please see the NAT chapter for a more detailed discussion on the Network Address
Translation feature. The choices are Full Feature, None or SUA Only.
DESCRIPTION
Internet Access