Log Settings - ZyXEL Communications ZYWALL 10W User Manual

FIELD
Destination This field lists the destination IP address and the port number of the incoming packet.
Note This field displays additional information about the log entry.
Email Log Now Click Email Log Now to send the log screen to the e-mail address specified in the Log
Settings page (make sure that you have first filled in the Address Info fields in Log
Settings, see section 18.2).
Refresh Click Refresh to renew the log screen.
Clear Log Click Clear Log to delete all the logs.

18.2 Log Settings

You can configure the ZyWALL's general log settings in one location.
Click the Advanced, and then Logs links on the navigation panel and then the Log Settings tab to open the
Log Settings screen.
Use the Log Settings screen to configure to where the ZyWALL is to send logs; the schedule for when the
ZyWALL is to send the logs and which logs and/or immediate alerts the ZyWALL is to send.
Centralized Logs
ZyWALL 10~100 Series Internet Security Gateway
Table 18-1 View Log
DESCRIPTION
18-3