Figure 21-10 Menu 24.4: System Maintenance: Diagnostic - ZyXEL Communications ZYWALL 10W User Manual
Internet security gateway
Hide thumbs
Also See for ZYWALL 10W:
- User manual (708 pages) ,
- Quick start manual (9 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Follow the procedure below to get to Menu 24.4 - System Maintenance – Diagnostic.
Step 1.
From the main menu, select option 24 to open Menu 24 - System Maintenance.
Step 2.
From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System Maintenance -
Diagnostic.
Figure 21-10 Menu 24.4: System Maintenance: Diagnostic
21.4.1 WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in Figure 21-11. LAN DHCP has
already been discussed. The ZyWALL can act either as a WAN DHCP client (IP Address Assignment
field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet)
or None, (when you have a static IP). The WAN Release and Renewal fields in menu 24.4 conveniently
allow you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a
fashion similar to winipcfg.
System Information and Diagnosis
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1.
Ping Host
2.
WAN DHCP Release
3.
WAN DHCP Renewal
4.
Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
ZyWALL 10~100 Series Internet Security Gateway
21-11
Advertisement
Table of Contents
Troubleshooting
