About; Figure 4-7 Utility - About - ZyXEL Communications ZYAIR 200 User Manual

ZyAIR 200 Wireleass LAN USB Adapter
For 64bit encryption you may choose:
•
Alphanumeric: 5 characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (e.g. MyKey)
•
Hexadecimal: 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" , proceeded by the
characters "0x" (for example 0x11AA22BB33)
For 128bit encryption you may choose:
•
Alphanumeric: 13 characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (e.g.
MyKey12345678)
•
Hexadecimal: 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9", proceeded by the
characters "0x" (for example 0x00112233445566778899AABBCC).
After entering the WEP keys in the key field, select one key as an active key, click Modify and to make the
setting take effect.
To allow encrypted data communications, you must set the same encryption key
values on all wireless stations and/or Access Points. For example, if you use Key 1 on
your ZyAIR 200 and the value is (e.g., MyCar), the same value must be assigned to
Key 1 for all other client stations. The values you enter on the Encryption dialog box
will only be visible the first time you enter the keys. After closing this dialog box, all
Key values will be displayed as "xxxxxxxxxxxx" every time the tab is displayed again.

4.2.7 About

Use About to display the driver, firmware and application version of your ZyAIR 200.
4-10
Figure 4-7 Utility – About
Utility Setup and Configuration