ZyAIR 200 Wireless LAN USB Adapter
Problems Communicating With the Computer
PROBLEM
The ZyAIR 200 client cannot
communicate with the other
computer in the Ethernet
when the Infrastructure
mode is configured.
AP Browser utility shows all
channel signals are low
5-3
Table 5-4 Troubleshooting Communication Problems
Make sure that the Access Point and associated computer are on.
Use the AP Broswer utility to verify operating Access Points have high
Signal. Change the Access Point and all the stations within the BSS to
another radio channel if Signal is low.
Make sure that the computer and Access Point share the same
security option.
Move your computer closer to the Access Point within the transmission
range.
There is too much radio interference (for example microwave oven)
around your wireless network. Relocate or reduce the radio interference.
CORRECTIVE ACTION
Troubleshooting