Table of Contents
Advertisement
Table 29-2 Menu 11.3 Remote Node Network Layer Options
FIELD
Select SUA Only if you have just one public WAN IP address for your
Prestige. The SMT uses Address Mapping Set 255 (menu 15.1 - see
section 32.3.1).
Select None to disable NAT.
Address
When Full Feature is selected in the NAT field, configure address
Mapping Set
mapping sets in menu 15.1. Select one of the NAT server sets (2-10) in
menu 15.2 (see the NAT chapter for details) and type that number here.
When SUA Only is selected in the NAT field, the SMT uses NAT server set
1 in menu 15.2 (see the NAT chapter for details).
Metric
The metric represents the "cost" of transmission for routing purposes. IP
routing uses hop count as the cost measurement, with a minimum of 1 for
directly connected networks. Type a number that approximates the cost for
this link. The number need not be precise, but it must be between 1 and
15. In practice, 2 or 3 is usually a good number.
Private
This determines if the Prestige will include the route to this remote node in
its RIP broadcasts. If set to Yes, this route is kept private and not included
in RIP broadcast. If No, the route to this remote node will be propagated to
other hosts through RIP broadcasts.
RIP
Press [SPACE BAR] and then [ENTER] to select the RIP Direction.
Direction
Options are Both, In Only, Out Only or None.
Version
Press [SPACE BAR] and then [ENTER] to select the RIP version. Options
are RIP-1, RIP-2B or RIP-2M.
Multicast
IGMP-v1 sets IGMP to version 1, IGMP-v2 sets IGMP to version 2 and
None disables IGMP.
IP Policies
You can apply up to four IP Policy sets (from 12) by typing in their numbers
separated by commas. Configure the filter sets in menu 25 first (see the IP
Policy Routing chapter) and then apply them here.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
29.3.1 My WAN Addr Sample IP Addresses
Remote Node Profile
Prestige 653HWI Series User's Guide
DESCRIPTION
EXAMPLE
2
2
No
None
RIP-1
None
3, 4, 5, 6
29-7
Advertisement
Table of Contents
