Step 3.
Now, type the route number of a static route you want to configure.
The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup.
FIELD
Route #
Route Name
Active
Destination IP Address
IP Subnet Mask
Remote Node TCP/IP Configuration
Menu 12.1 - IP Static Route Setup
1. ________
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter selection number:
Figure 5-7 Menu 12.1 — IP Static Route Setup
Menu 12.1.1 - Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel:
Figure 5-8 Edit IP Static Route
Table 5-3 Edit IP Static Route Menu Fields
This is the index number of the static route that you chose in menu 12.1.
Type a descriptive name for this route. This is for identification purpose only.
This field allows you to activate/deactivate this static route.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a route to
a single host, use a subnet mask of 255.255.255.255 in the subnet mask field
to force the network number to be identical to the host ID.
Type the subnet mask for this destination. Follow the discussion on IP Subnet
Mask in this manual.
Prestige 650H ADSL Router
DESCRIPTION
5-7