Configuring A Filter Set; Figure 8-3 Menu 21 - Filter Set Configuration - ZyXEL Communications PRESTIGE 650H-13 User Manual

Prestige 650H ADSL Router
For incoming packets, your Prestige applies data filters only. Packets are processed depending on whether a
match is found. The following sections describe how to configure filter sets.
The Filter Structure of the Prestige
A filter set consists of one or more filter rules. Usually, you would group related rules, for example, all the
rules for NetBIOS, into a single set and give it a descriptive name. You can configure up to twelve filter
sets with six rules in each set, for a total of 72 filter rules in the system.
8.2

Configuring a Filter Set

To configure a filter set, follow the steps shown next.
Step 1. Enter 21 in the main menu to display Menu 21 – Filter Set Configuration.
Filter
Set #
------
1
2
3
4
5
6
Step 2. Type the filter set to configure (no. 1 to 12) and press [ENTER]
Filter rule set 11 and 12 are used by the Web Configurator. Your custom
Step 3. Type a descriptive name or comment in the Edit Comments field and press [ENTER].
8-4
Menu 21 - Filter Set Configuration
Comments
-----------------
NetBIOS_WAN
NetBIOS_LAN
TELNET_WAN
PPPoE
FTP_WAN
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 8-3 Menu 21 — Filter Set Configuration
configurator may be lost if you use rule 11 or 12.
Filter
Set # Comments
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 WebSet
.
Filter Configuration