Configuration Utility Problems; Powerline Problems - ZyXEL Communications PLA4205 User Manual

500 mbps powerline ethernet adapter
Hide thumbs Also See for PLA4205:
Table of Contents

Advertisement

Chapter 6 LEDs and Troubleshooting
The POWER and HomePlug light blink at the same time.
• You have pressed the ENCRYPT button for more than three seconds. Try setting up a connection
again, this time pressing the ENCRYPT buttons on both devices for less than three seconds.

6.3 Configuration Utility Problems

The PLA42xx Series Configuration Utility displays an error during installation.
• Make sure your computer is using Windows XP or Windows Vista (32-bit) operating system. At
the time of writing, this is the only compatible operating system for the configuration utility.
The PLA42xx Series Configuration Utility does not display all or any of my devices.
• Inspect the LEDs on your PLA4205 and make sure that the ETHERNET and HomePlug LEDs are on
or blinking. See
• Check all ZyxEL HomePlug AV devices on your network have the latest firmware installed. The
latest utility cannot communicate with PLA4205s using earlier versions of the firmware. Go to
Section 4.4 on page 29
• Check you are using the latest version utility. Earlier version utilities cannot communicate with
PLA4205s using the latest firmware. If you do not have the latest utility, download it from the
ZyXEL website.
• If the device is not a ZyXEL device, then the DAK and Network Name will be greyed out.
• If you are running another tool such as the Firmware Detection Tool, the Utility will not detect
your local device.

6.4 Powerline Problems

The signal on my powerline network is weak.
Your powerline adapters may be connected to electrical surge protectors. Connect them to standard
1
power outlets.
Your powerline adapters may be located close to large appliances such as refrigerators or air-
2
conditioners that cause interference with the powerline signal. Move the adapters further away
from such appliances to reduce interference.
50
Section 6.1 on page 47
for troubleshooting LED related problems.
for instructions on installing the latest firmware.
PLA4205 User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents