About Screen - ZyXEL Communications PLA4205 User Manual

Chapter 4 The Configuration Utility
The following table describes the labels in this screen.
Table 6 Advanced Screen
LABEL
Adapter
Site
MAC Address
Priority
Save

4.7 About Screen

Use the About screen to view information regarding the configuration utility and firmware version
of the PLA4205 you are connected to. Click the
the About screen.
Figure 18 About Screen
34
DESCRIPTION
This field identifies which powerline network information is displayed. Different
powerline networks are identified by the Ethernet interface (network card) on your
computer which is connected directly to a powerline adapter. Typically there is only
one connection. However, if your computer has two network cards and both are
connected to a powerline adapter, then you have two powerline networks.
This field displays:
• Local, if it is the PLA4205 directly connected to the computer running the
configuration utility.
• Remote, if it is a powerline adapter in your powerline network but not directly
connected to the computer running the configuration utility.
This is a read-only field which shows the MAC address of the powerline adapter you
are configuring. You can find the MAC address of your PLA4205 displayed on a
sticker on the bottom of your device.
Select a priority setting from the drop-down box for traffic FROM your selected
device. The options, in order of importance, are High, Medium, Normal and Low.
Click this to apply your changes. The new Priority setting is applied to the selected
powerline adapter.
icon in the top right corner of the utility to view
Upgrade to
latest version
firmware and
utility.
PLA4205 User's Guide