S&C 2000 Series Instruction Sheet page 7

Packing
The Series 2000 Circuit-Switcher interrupter is a porce-
lain-enclosed, hermetically sealed device containing
sulfur-hexafluoride (SF ) gas under pressure (75 PSI). To
6
guard against breakage and possible hazard to person nel,
the Series 2000 Circuit-Switcher interrupter is shipped in
a bolted-on container.
Replacement interrupt ers are shipped with this
container in place. Do not remove the interrupter con-
tainer until so directed in the following instructions. A
separate interrupter container and associated hardware
is shipped with the replace ment interrupter for use during
replacement.
WARNING
DO NOT disassemble or modify the interrupters� The
interrupters are pressurized at 75 PSIG� Serious
personal injury can result�
Shipping and Handling
Inspection
Examine the shipment for external evidence of damage as
soon after receipt as possible, preferably before removal
from the carrier's conveyance. Check the bill of lading to
make sure all listed shipping skids, crates, and containers
are present.
If there is visible loss and/or damage:
1. Notify the delivering carrier immediately.
2. Ask for a carrier inspection.
3. Note the shipment condition on all copies of the delivery
receipt.
4. File a claim with the carrier.
If concealed damage is discovered:
1. Notify the delivering carrier within 15 days of receipt of
shipment.
2. Ask for a carrier inspection.
3. File a claim with the carrier.
Also, notify S&C Electric Company in all instances of
loss and/or damage.
S&C Instruction Sheet 716-600 7