Table of Contents
Advertisement
Chapter 16 Remote Management
when another remote management session of higher priority starts. The priorities
for the different types of remote management sessions are as follows.
Telnet
1
HTTP
2
16.1.1 What You Can Do in the Remote Management Screens
• Use the WWW screen
interface(s) and from which IP address(es) users can use HTTP to manage the
ZyXEL Device.
• Use the Telnet screen
interface(s) and from which IP address(es) users can use Telnet to manage the
ZyXEL Device.
• Use the FTP screen
interface(s) and from which IP address(es) users can use FTP to access the
ZyXEL Device.
• Your ZyXEL Device can act as an SNMP agent, which allows a manager station to
manage and monitor the ZyXEL Device through the network. Use the SNMP
screen (see
and from which IP address(es) users can use SNMP to access the ZyXEL Device.
• Use the DNS screen
interface(s) and from which IP address(es) users can send DNS queries to the
ZyXEL Device.
• Use the ICMP screen
ZyXEL Device will respond to pings and probes for services that you have not
made available.
16.1.2 What You Need to Know About Remote Management
Remote Management Limitations
Remote management does not work when:
• You have not enabled that service on the interface in the corresponding remote
management screen.
• You have disabled that service in one of the remote management screens.
• The IP address in the Secured Client IP Address field does not match the
client IP address. If it does not match, the ZyXEL Device will disconnect the
session immediately.
• There is already another remote management session with an equal or higher
priority running. You may only have one remote management session running
at one time.
• There is a firewall rule that blocks it.
182
(Section 16.2 on page
(Section 16.3 on page
(Section 16.4 on page
Section 16.5 on page
(Section 16.6 on page
(Section 16.7 on page
183) to configure through which
184) to configure through which
185) to configure through which
186) to configure through which interface(s)
188) to configure through which
189) to set whether or not your
P-660HN-TxA User's Guide
Advertisement
Table of Contents
