ZyXEL Communications P-660H Series User Manual page 50

P-660H/HW-D Series User's Guide
Table 4 Status Screen
LABEL
LAN Information
IP Address
IP Subnet Mask
DHCP
WLAN Information (Wireless devices only)
SSID
Channel
WEP
Security
Firewall
Content Filter
System Status
System Uptime
Current Date/Time This field displays your ZyXEL Device's present date and time.
System Mode
CPU Usage
Memory Usage
Interface Status
Interface
Status
Rate
Summary
Any IP Table
WLAN Status
(Wireless devices
only)
49
DESCRIPTION
This is the LAN port IP address.
This is the LAN port IP subnet mask.
This is the WAN port DHCP role - Server, Relay or None.
This is the descriptive name used to identify the ZyXEL Device in the wireless
LAN.
This is the channel number used by the ZyXEL Device now.
This displays the status of WEP data encryption.
This displays whether or not the ZyXEL Device's firewall is activated.
This displays whether or not the ZyXEL Device's content filtering is activated.
This is the total time the ZyXEL Device has been on.
This displays whether the ZyXEL Device is functioning as a router or a bridge.
This number shows how many kilobytes of the heap memory the ZyXEL Device is
using. Heap memory refers to the memory that is not used by ZyNOS (ZyXEL
Network Operating System) and is thus available for running processes like NAT,
VPN and the firewall.
The bar displays what percent of the ZyXEL Device's heap memory is in use. The
bar turns from green to red when the maximum is being approached.
This number shows the ZyXEL Device's total heap memory (in kilobytes).
The bar displays what percent of the ZyXEL Device's heap memory is in use. The
bar turns from green to red when the maximum is being approached.
This displays the ZyXEL Device port types.
This field displays Down (line is down), Up (line is up or connected) if you're using
Ethernet encapsulation and Down (line is down), Up (line is up or connected), Idle
(line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a call) if you're
using PPPoE encapsulation.
For the WLAN port, it displays Active when WLAN is enabled or Inactive when
WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting.
For the WAN port, it displays the downstream and upstream transmission rate.
For the WLAN port, it displays the transmission rate when WLAN is enabled or N/A
when WLAN is disabled.
Use this screen to view a list of IP addresses and MAC addresses of computers,
which are not in the same subnet as the ZyXEL Device.
This screen displays the MAC address(es) of the wireless stations that are
currently associating with the ZyXEL Device.
Chapter 2 Introducing the Web Configurator