Figure 76 Multiple Servers Behind Nat Example; Figure 77 Nat Port Forwarding; Configuring Port Forwarding - ZyXEL Communications P-660H Series User Manual

Figure 76 Multiple Servers Behind NAT Example

8.5 Configuring Port Forwarding

Note: The Port Forwarding screen is available only when you select SUA Only in
the NAT > General screen.
If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
Click Network > NAT > Port Forwarding to open the following screen.
See Table 47 on page 137

Figure 77 NAT Port Forwarding

Chapter 8 Network Address Translation (NAT) Screens
for port numbers commonly used for particular services.
P-660H/HW-D Series User's Guide
138