AEG NSW8S826GT User Manual page 9

5.1 Control panel
Cellar Mode key
1
Display
2
Temperature decrease key
3
5.2 Display
A. Alarm indicator
B. Filter reset indicator
C. Temperature indicator
5.3 Switching on and off
To switch on the appliance:
1. Insert the plug into the wall socket.
2. If the display is off, tap and hold the
Temperature decrease key and Light
key for 3 seconds.
The display shows the default set
temperature 12°C.
To switch off the appliance, repeat step 2 and
pull out the plug from the wall socket.
To select a different temperature, refer to the
"Temperature regulation" section.
5.4 Temperature regulation
The default set temperature for the wine
cabinet is 12°C.
The temperature can be adjusted
between +5 and +20°C.
1 2
A B
D
D. Child lock indicator
To set the temperature, tap the Temperature
increase or decrease key for the
compartment:
• Single tap shows the current set
• Second tap increases or decreases the
• To speed up the selection, tap and hold
To set the right temperature for each type of
wine, refer to the "Daily use" chapter.
3 4 5
Temperature increase key
4
Light key
5
C
temperature.
temperature by one degree.
the Temperature increase or decrease key
until you reach the desired temperature.
By default, the temperature digits show
the current temperature. When you tap
once or start selecting a new setting, the
displayed digits blink. After 3 seconds
without tapping the keys, the digits stop
blinking and the current temperature is
displayed.
ENGLISH 9