Cli Examples - Dell POWERCONNECT 6200 SERIES Configuration Manual

CLI Examples

The following are examples of the commands used in the Port Security feature.
Example #1: Enable Port Security on an Interface
console(config)#interface ethernet 1/g18
console(config-if-1/g18)#port security ?
<cr>
discard
max
learned
trap
console(config-if-1/g18)#port security
Example #2: Show Port Security
console#show ports security ?
addresses
ethernet
port-channel
<cr>
Example #3: Show Port Security on an Interface
console#show ports security ethernet 1/g18
Port Status
----- --------
1/g18 Locked
Press enter to execute the command.
Discard frames with unlearned source addresses.
Configure the maximum addresses that can be
on the port.
Sends SNMP Traps, and specifies the minimum time
between consecutive traps.
Addresses.
Ethernet port.
Link Aggregation interface.
Press enter to execute the command.
Action
-----------------
Discard
Maximum Trap
------- -------
100 Disable
Frequency
---------
30
Switching Configuration
51