Cli Examples - Dell POWERCONNECT 6200 SERIES Configuration Manual

CLI Examples

The following are examples of the commands used in the SNTP feature.
Example #1: Viewing SNTP Options
(Dell PC62XX Routing)(Config) #sntp ?
console(config)#sntp ?
authenticate
authentication-key
broadcast
client
server
trusted-key
unicast
Example #2: Configuring the SNTP Server
console(config)#sntp server ?
<ipaddress/domain-name>
console(config)#sntp server 192.168.10.25 ?
key
poll
priority
<cr>
console(config)#sntp server 192.168.10.25
18
System Configuration
Require authentication for received Network Time
Protocol (NTP) traffic from servers.
Define an authentication key for Simple Network Time
Protocol (SNTP).
Configure SNTP client broadcast parameters.
Configure the SNTP client parameters.
Configure SNTP server parameters.
Authenticate the identity of a system to which
SNTP will synchronize.
Configure SNTP client unicast parameters.
Enter SNTP server address or the domain name.
Authentication key to use when sending packets to
this peer.
Enable/Disable SNTP server polling.
Configure SNTP server priority.
Press enter to execute the command.