Internal Storage Status Screen; Figure 124 Storage > Internal Storage > Status; Table 19 Storage > Internal Storage > Status - ZyXEL Communications NSA-2401 User Manual

6.2 Internal Storage Status Screen

Click Storage > Internal Storage > Status to display the following screen. This screen
displays general information about the disks installed in the NSA and the disk arrays and
volumes created on them.
Figure 124 Storage > Internal Storage > Status
Volumes and
their capacity
Array type and
capacity
Disks in the array
The following table describes this screen.
Table 19 Storage > Internal Storage > Status
LABEL/ICON
Array type and capacity
Volumes and their
capacity
Disk
Used Space
Locked Volume
Used Space (snapshot)
RAID Free Space
Volume Free Space
Disks in the array
NSA-2401 User's Guide
DESCRIPTION
Wizards
Click this icon to open the Disk Setup Wizard to create a new disk array
or volume.
The type of disk array (JBOD or RAID level) is listed first along with the
array's capacity. See Section 6.4 on page 132
disk array.
The name and capacity of each volume in the array.
This represents the internal (physical) hard drives.
This represents how much of a volume's capacity is currently filled by
files.
This represents a volume to which the NSA is blocking access.
Snapshots (records of changes to files within a volume) are stored in the
space on the disk array that is not allocated to volumes. This represents
how much of that space is currently filled by snapshots. See
page 195 for more on snapshots.
This is space on the disk array that is not allocated to volumes and is not
(yet) used by snapshots.
This is space on a storage volume that is not used up by files.
The disks that belong to the array display under the array's volumes.
Chapter 6 Storage Screens
for more on the types of
Chapter 9 on
127