Managed Nodes; Operating System - Dell OPENVIEW NNM SE 1.2 User Manual

With hp openview nnm se 1.2

Table of Contents

HP OpenView Network Node Manager Special Edition (NNM SE) enhances your capa-

bility to monitor and manage Dell

and Microsoft

Windows NT

ware Instrumentation Package (HIP) 2.2 or later. HP OpenView NNM SE also

manages other Dell systems with the Dell Inspector and can be used to manage non-

Dell systems.

Through management instrumentation of hardware components specific to Dell sys-

tems, HP OpenView NNM SE allows you to access status information about Dell

PowerEdge servers as well as Dell PowerEdge Scalable Disk System 100 (SDS 100)

storage systems. You can also monitor desktop, workstation, and portable

computers.

For Dell PowerEdge servers equipped with Dell Remote Assistant Cards (DRAC), Dell

HIP supports out-of-band (via dial-up modem or network interface controller [NIC])

status retrieval and management operations.

The HP online manual, Using Network Node Manager Special Edition , contains infor-

mation on installing, setting up, and troubleshooting the NNM SE software. This

manual with the filename nnmseug.pdf can be found in the elecdocs directory on

the HP OpenView Network Node Manager Special Edition CD, which also contains

additional hardware component user's guides. The HP OpenView NNM SE 1.2 With

Dell OpenManage HIP 3.2 User's Guide can also be found in the elecdocs directory

under the filename hipitg.pdf.

The HP OpenView NNM SE with Dell HIP consists of the following components:

Managed nodes for Windows NT and NetWare

Management station for Windows NT

Remote console for Windows NT

PowerEdge

servers running Novell

operating systems with Dell OpenManage

NetWare

Hard-

Introduction

1-1

Table of Contents

Openmanage hip 3.2