Table of Contents
Advertisement
8.
Select a destination directory. Click Browse to find the drive mapped to the Net-
Ware drive. After you have selected the NetWare drive, you must type system
in the drive path.
If you choose the default directory and it does not exist, a dialog box appears ask-
ing if you want the directory to be created. Click Yes.
The Confirm New Directory window appears.
9.
Click Yes to accept the new directory or No to select another directory.
Your system begins copying files to the directory you have chosen.
10. Select the hardware components present on the server to install the instrumen-
tation for that component.
NOTE: For more information, see "Hardware Instrumentation Installation" found
later in this section.
Your system begins copying files to the directory you have chosen.
The following message appears:
Updating autoexec.ncf completed successfully. Restart the
NLMs for changes to take effect.
11. Click OK.
When your system finishes copying files, the Setup Complete window appears.
12. Click Next.
The Setup Complete window appears.
13. Click Finish to complete the setup process.
14. Reboot your system.
NOTE: Close all Dell OpenManage applications and OpenView applications before
upgrading the node.
You can only upgrade a node to Dell HIP version 3.2 if it is installed with Dell HIP 3.0
or later. If you are running LDSM 2.52 with Dell HIP 2.2, you must uninstall it before
installing Dell HIP 3.2.
NOTE: To upgrade a NetWare node, you must uninstall the current version and then
install the newer version.
To upgrade a node, use one of the following procedures depending on the version of
NNM SE you already have installed.
Installation and Upgrade Procedures
2-7
Advertisement
Table of Contents
