BGS technic 71100 Instruction Manual

SPECIFICATIONS
● Two swivel and two fixed castors
● Turntable 360° rotatable via 90° offset crank
wheel
● Four mounting arms with elongated holes for
optimal motor alignment
● Large drip tray prevents soiling of the floor
when dismantling the oil pan, cylinder head, etc.
Max. Capacity: 800 Kg
Height: 1100 mm
Width: 940 mm
Depth: 1300 mm
INTENDED USE
This produkt is a device used to mount an automotive type of engine when removed from a vehicle.
This device is designed to provide access to the engine for servicing and/or rebuilding. The stand
incorporates a locking,rotating mounting plate so that the user can turn the engine for ease access.
The stand also incorporates wheels and casters to allow mobility across a smooth and flat surface.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
SAFETY NOTES
When using this tool, fundamental precautionary measures must always be ensured, in order to
reduce the risk of personal injury and property damage.
● Keep children and unauthorised persons away from the work area.
● Do not let any children play with the tool or its packaging.
● Make sure that the work area is sufficiently illuminated.
● Keep the work area clean, organised, dry and free from other materials.
● Do not allow untrained persons to work with this lifting tool.
● Do not make any changes to the product.
● Only use accessories that are designed for use with lifting tools.
● Maintain the tool carefully to ensure safe use.
● Check the product for cracks, warpage, and other damage at regular intervals.
● Do not use the product if it is damaged. It have to repaired by a qualified personal.
● Store the tool in a dry and safe location out of the reach of children..
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Stand | 800 Kg
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 71100
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed