Advertisement
Quick Links
Advertisement
Related Manuals for DirekTronik 20117393
Summary of Contents for DirekTronik 20117393
- Page 1 User Guide Direktronik Connect Omanagerad 16xPoE + 2xRJ45 2xSFP Uplink...
- Page 2 If any part is lost and damaged, please contact your local agent immediately. Introduction 20117393 PoE Switch are Gigabit Uplink Unmanaged Switch which provides you with a high-performance, low- cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps. Increase the speed of your network server and backbone connections, making Gigabit connection to a server or uplinking a network necessarily.
- Page 3 IP Cameras. Note: After change the mode, there is no need to restart manually to make the corresponding configuration take effect. Rear Panel The rear panel of 20117393 PoE Switch indicates an AC inlet power socket, Grounding Column. - 2 -...
- Page 4 Installation the Switch This part describes how to install your Ethernet Switch and make connections to it. Please follow the following instructions in avoid of incorrect installation causing device damage and security threat. ⚫ Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet cloth or liquid; ⚫...
- Page 5 Turn on the switch Plug in the negative connector of the provided power cord into the power socket of the device, and the positive connector into a power outlet . After the device is powered on, it begins the Power-On Self-Test. The PWR LED indicator will light on all the time.
- Page 6 Specifications Model Direktronik Connect Omanagerad 16xPoE + 2xRJ45 2xSFP Uplink Standard IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af, IEEE802.3at 10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5 cable (≤100m) Network Media(Cable) 1000BASE-T: UTP category 5e cable (≤100m) 1000BASE-X: MMF or SMF SFP module...
Need help?
Do you have a question about the 20117393 and is the answer not in the manual?
Questions and answers