Related Manuals for DirekTronik SX-SWE01B
Summary of Contents for DirekTronik SX-SWE01B
- Page 1 Best.nr: 20101099 Mixed Input Type-C VGA HDMI HDMI 2.0 HDBaseT Switch Support 4K@60hz YUV4:4:4, 18Gbps, HDR...
- Page 2 Operating Instruction Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
-
Page 3: Table Of Contents
Operating Instruction Catalogue 1. Features................................4 2. Package Contents..............................4 3. Specifications...............................4 4. Panel Descriptions..............................5 4.1 Menu Display..............................6 5. Application Diagram............................9 6. Remote Control Description..........................9 7. IR system................................10 8. PC Tool Control..............................10 8.1 Port setup..............................10 8.2 Control interface............................11 8.3 Network Interface for device........................12 9. -
Page 4: Features
Operating Instruction 1. Features Incorporate HDBaseT technology HDMI 2.0 version support 4K@60Hz YUV4:4:4, 18G, HDR10 Support 1x VGA, 1x Type-C, 2x HDMI input Support 1x HDMI and HDBT output simultaneously Transmit up to 70m under 1080p@60Hz, 40m under 4K@60Hz ... -
Page 5: Panel Descriptions
Operating Instruction Panel Descriptions Front Panel ① LCD: Showing HDBaseT switch informations ② Function button: Up, Down, Left, Right ③ Function button: Menu, Enter Left Guide button Short press:left/right choose function option in submenu,in MIC Right Guide button input VOL/analog out VOL adjustment: left(-) right(+) Up Guide button Short press:up/down choose function option in submenu Down Guide button... -
Page 6: Menu Display
Operating Instruction 4.1 Menu Display Press Menu button,menu include VIDEO SET、AUDIO SET、EDID SET、MIC IN VOL SET、ANAL OUT VOL SET、IP QUERY、UART QUERY、REST SET, press any button to highlight LED screen, and auto turn dark without any operation after 20 seconds. 1). VIDEO SET: For input switch,select VIDEO SET and press enter button,press left/right button select current input signal, press enter button again auto back to main menu to finish setting. - Page 7 Operating Instruction 3). EDID SET: Support 4 modes- 4K60(Default),1080P(Default),COPY HDMI,COPY HDBT. Select EDID SET, press Enter button,then press left/right button to select EDID for input, press Enter button again auto back to main menu to finish setting. 4). MIC IN VOL SET: MIC input volume adjustment from 0~10,maximum 10 for loudest sound,minimum 0. Select MIC IN VOL SET,press Enter button for volume control mode,press left button to decrease vol.,press right button to increase vol.,press Enter button again auto back to main menu to finish setting.
- Page 8 Operating Instruction 6). IP QUERY: Default IP address 192.168.1.168,DHCP: off ,press left/right button select DHCP status,short press Enter button and back to up one level. 7). UART QUERY: Device baudrate support 9600,19200,38400,57600,115200(default),not support to modify by panel button,select UART QUERY,short press Enter button to check current baudrate. 8).
-
Page 9: Application Diagram
Operating Instruction 5. Application Diagram 6. Remote Control Description ① Standby Mode ② Mute ③ Video input: “1” for TypeC-1; “2” for PC-2(VGA); “3” for HDMI-3; “4”for HDMI-4; ④ MIC in (ON/OFF)/VOL control; ⑤ Analog audio out (ON/OFF)/VOL control;... -
Page 10: Ir System
Operating Instruction 7. IR system The HDBaseT switch can pass the IR signal through the IR system to the HDMI source or pass the IR signal from the HDMI source to the HDMI sink. Dual way IR using: Step1: “IR IN” is for HDBT output, “IR OUT” is for input channel. Step2: HDBaseT receiver support connect with IR-RX cable to control the HDBaseT switch/DVD by remote. -
Page 11: Control Interface
Operating Instruction 4 ).If popup“ERROR” means COM port is invalid and not be connected correctly,please press “OK”and refresh again. 5). Below will show current COM port info. and baudrate when connected to device: 8.2 Control interface... -
Page 12: Network Interface For Device
Operating Instruction 1). Video Input: Switch Type C, VGA, HDMI input. 2). EDID Mode: 4K60: Default EDID 4K@60Hz 1080P: Default EDID 1080P@60Hz HDMI: Copy HDMI out EDID for input(Copy mode) HDBT: Copy HDBT out EDID for input(Copy mode) 3). Audio Input Mode: click to choose HDMI,Analog,Mute option (HDMI: audio of Type C/VGA/HDMI, Analog: audio embedded/MIC in) 4). -
Page 13: Web Control
Operating Instruction ⑤ DHCP ON/OFF ⑥ Apply: Click to confirm modified static IP Note:When you click for DHCP ON,then IP Address,Net Mask Address,Gate Way Address frames all become grey and can not be modified. 9. WEB Control 9.1 Change the IP address of your PC. 1). -
Page 14: Enter Web And Control
Operating Instruction (Default IP Address: 192.168.1.168; MASK: 255.255.255.0; Gateway:192.168.1.1) 9.2 Enter Web and Control. 1). Enter the default IP address of the matrix: 192.168.1.168. 2). You will see following picture and control: (No have interface to type in User Name and Password) (The same interface to PC tool,please see the description in PC tool control) Note: web control is recommended to use Google, fire fox, IE8 and above browsers, using other browsers may not be compatible. -
Page 15: Command Control
Operating Instruction 10. Command Control Control software operation: The serial control software is illustrated with SSCOM32 as an example. Basic Settings: Double-click the software in the installation package to run specifically (as shown in figure 1 ) and install the RS232 software on the computer. Enter the main interface of the software, as shown in the figure below. -
Page 16: Power Off And Reboot Input Priority Mode
Operating Instruction Instructions: 1). All commands start from “#”, “%d” parameters No. 2). The “_” in the commands cannot omit. The following table is only an example. Please refer to the list of instructions. Command format， Instruction parameter 1 parameter 2 description (%d: parameter number) #cmd... -
Page 17: Rs232 Pass Through
Operating Instruction Note: 1).If current input have signal,device will not auto switch to other input when reboot,it will keep current input. 2).When all input no have signal,device save last switch port when reboot. 3).The priority mode only valid when device with signal input. 12. - Page 18 Operating Instruction 13.3 GUI Web upgrade 1).Connect unit to PC with USB cable from micro USB port,click software,REFRESH and choose correct COM port that connect to product,and baudrate 115200(default).The baud rate setting is consistent with the host baud rate. 2).Type in “F0 01” in PORT and choose update program in PATH,then click UPDATA wait for update until it prompt “Succeed”...
-
Page 19: Maintenance
Operating Instruction MAINTENANCE Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit. PRODUCT SERVICE (1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged; (b) Objects or liquids have gotten into the unit;... -
Page 20: Limitedwarranty Limits And Exclusions
Operating Instruction LIMITED WARRANTY LIMITS AND EXCLUSIONS 1). This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification,...
Need help?
Do you have a question about the SX-SWE01B and is the answer not in the manual?
Questions and answers