Download Print this page

Superpool ZENITH Instruction Manual page 9

Ph controller

Advertisement

10.2 pH Control Mode – Turning ON or OFF the pH Mode
The default setting on the chlorinator is for the acid dosing system to be 'OFF'. This needs to be
turned to 'ON' to operate the Zenith pH Controller.
PROCEDURE
To turn ON the acid dosing of the pH controller, enter the 'pH MODE' menu
from the 'pH Control Mode' menu explained in 10.1, using the [+], [-] &
[OK] button change the selection from OFF to ON.
pH CONTROL MODE
LCD DISPLAY
pH Mode: OFF
[+] or [-] to change
[OK] SAVE [<] BACK
10.3 pH1 Run Time – How the dosing system works
The c 'pH1 Run Time' is programmed automatically when setting up the volume of the swimming
pool in the chlorinator. The system calculates the minutes per day your pH controller should run
based on the volume of your pool, and this can be manually changed.
PROCEDURE
To adjust the run time, enter the 'pH1 Run Time' menu from the 'pH Control
Mode' menu explained in 10.1, using the [+], [-] & [OK] button.
pH CONTROL MODE
LCD DISPLAY
pH1 Run Time
pH2 Demand or Prime
[+]UP[-]DN [OK]ENTER
Page 7 of 14

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZENITH and is the answer not in the manual?

Subscribe to Our Youtube Channel