Table of Contents
Advertisement
2. Drill two holes for the screws. Make sure the distance between the
centers of the holes matches what is listed in the product
specifications appendix.
Be careful to avoid damaging pipes or cables located inside
the wall when drilling holes for the screws.
3. Do not screw the screws all the way into the wall. Leave a small gap
of about 0.5 cm between the heads of the screws and the wall.
4. Make sure the screws are snugly fastened to the wall. They need to
hold the weight of the FTU2000 with the connection cables.
11
Advertisement
Table of Contents
