Figure 22 Initial Setup Example: Management Ip Address - ZyXEL Communications ES-2024A User Manual

ES-2024A User's Guide

Figure 22 Initial Setup Example: Management IP Address

1 Connect your computer to any Ethernet port on the switch. Make sure your computer is
in the same subnet as the switch.
2 Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar
to access the web configurator. See
3 Click Basic Setting and IP
Setup in the navigation panel.
4 Configure the related fields in the
IP Setup screen.
For the VLAN2 network, enter
192.168.2.1 as the IP address and
255.255.255.0 as the subnet
mask.
5 In the VID field, enter the ID of
the VLAN group to which you
want this management IP address
to belong. This is the same as the
VLAN ID you configure in the
Static VLAN screen.
6 Click Add.
50
Section 4.2 on page 39 for more information.
Chapter 5 Initial Setup Example