ZyXEL Communications ES-1100 Manual page 18

Chapter 2 Hardware Description and Connection
Attaching the Mounting Brackets to the Switch
Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket
1
with the screw holes on the side of the Switch.
Figure 8 Attaching the Mounting Brackets (ES1100-8P/16/16P/24E)
Figure 9 Attaching the Mounting Brackets (ES1100-24)
Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes
2
into the Switch.
Repeat steps
3
You may now mount the Switch on a rack. Proceed to the next section.
4
18
1 and 2 to install the second mounting bracket on the other side of the Switch.
ES1100 Series User's Guide