Page 1
WSFM E11 WSFM E12 Fixed Speaker Wall Mount For SONOS ® Era 100 ™ INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. US: +1 (800) 359-5520 • EMEA: +31 (0) 495 580 852 • UK: +44 (0) 800 056 2853 We’re ready to help! 中文文字说明请参见第...
Page 2
IMPORTANT SAFETY INSTRUCTIONS — PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS Before getting started, let’s make sure this product is perfect for you! This mount is designed to support only Sonos® Era 100™ speakers. CAUTION: Avoid potential personal injuries and property damage! ●...
Page 3
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Page 4
STEP 1-A Attach Wall Plate to Wall Drywall Only Installation CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall must not be less than 1/2 in. (12.7 mm) 1 in. (2.5 cm) Min. 1/2 in. 1/4 in. (12.7 mm) (6 mm)
Page 5
CAUTION: Avoid potential personal injury or property damage! DO NOT use power tools for this step. Both screws MUST BE firmly tightened to prevent unwanted movement of the wall plate . Ensure the wall plate is securely fastened to the wall before continuing on to the next step, but DO NOT overtighten the screws. Go to STEP 2, on PAGE 10...
Page 6
STEP 1-B Attach Wall Plate to Wall Wood Stud Installation CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm) ●...
Page 7
CAUTION: Avoid potential personal injury or property damage! DO NOT use power tools for this step. Both screws MUST BE firmly tightened to prevent unwanted movement of the wall plate . Ensure the wall plate is securely fastened to the wall before continuing on to the next step, but DO NOT overtighten the screws. Go to STEP 2, on PAGE 10...
Page 8
Solid Concrete or STEP 1-C Attach Wall Plate to Wall Concrete Block Installation CAUTION: Avoid potential personal injury or property damage! ● Mount the wall plate directly onto the concrete surface (no wall covering) ● Minimum solid concrete thickness: 8 in. (203 mm) ●...
Page 9
CAUTION: Avoid potential personal injury or property damage! DO NOT use power tools for this step. Both screws MUST BE firmly tightened to prevent unwanted movement of the wall plate . Ensure the wall plate is securely fastened to the wall before continuing on to the next step, but DO NOT overtighten the screws.
Need help?
Do you have a question about the SANUS WSFME12 and is the answer not in the manual?
Questions and answers