DeRoyal MAXAlign LSO Manual

MAXAlign
PUTTING ON YOUR BRACE:
1. Ensure both dials are released and in the "pulled out" position
2. Wrap the brace belts around your torso and align the back panel to the
center of your back (stand with your back against a wall to prop up the
brace to assist, if needed).
3. Wrap the right side of the belt over the left side using the hand strap and
ensure the right oval belt front completely overlaps the left oval belt front.
(Illustration A)
4. Push dials in and turn clockwise evenly to provide compression.
The brace should fit snug but not too tight. (Illustration B)
TAKING OFF YOUR BRACE:
1. Pull out on both dials to release compression
2. Use the hand strap to open the brace. Slide the brace off and set aside
until it is needed for future use
For questions or concerns regarding your DeRoyal spine brace, please contact our customer service line at 1(800)-DEROYAL or customerservice@deroyal.com.
They will direct you to a dedicated spine specialist that can address your needs or answer questions regarding your spine brace.
This Quick Reference Guide does not supersede the instructions given by a prescriber or the information contained in the Instructions for Use (IFU) which
accompany this device. Please refer to the IFU for all warnings, cautions and complete instructions.
WARRANTY
DEROYAL ® PRODUCTS ARE WARRANTED FOR NINETY (90) DAYS FROM THE DATE OF SHIPMENT FROM DEROYAL AS TO PRODUCT QUALITY AND WORKMANSHIP. DEROYAL'S WRITTEN
WARRANTIES ARE GIVEN IN LIEU OF ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
®
LSO SPINE BRACE
Application Video
How the BOA®
Fit System works.
A A
PUSH IN
TO ENGAGE
TIGHTEN
TURN FOR
PRECISION FIT
B B
PULL UP FOR FAST
RELEASE
Care Instructions:
Remove panels from the brace and clean
all soft goods by hand washing with mild
soap and let air dry completely prior to
reapplication. Anterior and posterior
panels can be cleaned by wiping down
with a disinfectant wipe.
©2023 DeRoyal Industries, Inc. | All Rights Reserved. The
DeRoyal logo and MAXAlign are registered trademarks of
DeRoyal Industries, Inc.
Boa is a registered trademark of Boa Technology Inc.
Part # 0-2202 | Reprint # 0-2570 | Revised 5/2023