Download Print this page
Gainsborough G482 Instructions For Use

Gainsborough G482 Instructions For Use

Solar peacock ornament

Advertisement

Quick Links

Solar Peacock Ornament
Item codes: G482
Instructions for Use
Please read and retain these instructions for future reference
ALWAYS USE ALKALINE BATTERIES.
DO NOT USE LITHIUM BATTERIES.
Please read this instruction manual thoroughly before starting and ensure you are familiar with the
operation of your new Solar Peacock Ornament.
How the solar light works:
During the day, the solar panel converts solar power into the rechargeable battery.
At night, the light turns on automatically by the stored energy. How long the light lasts depends on its
location, weather conditions and seasonal lighting availability.
Choosing the right location
An outdoor location with direct sunshine and where the solar panel of your light can receive at least
six hours of sunshine each day is an ideal location for a solar light.
Shady locations will influence the batteries charge and may shorten the working time of the light at
nighttime. The solar light should not be placed near lighting such as streetlight, which may cause the
light to turn off
INSTRUCTIONS FOR USE
1. Gently remove the statue from the packing and position it in a sunny location with the solar panel
facing the sun.
2. Press the switch to the "ON" position to turn the light function on and to charge the battery. Press the
switch to the "OFF" position to turn the light function off.
3. For the initial charge, allow the solar panel to charge the battery for a full day for best results. When
darkness falls, the solar light will illuminate for several hours(depending on charge).
Troubleshooting
If the light does not turn on at dusk after 8 hours of charging:
Ensure that the solar light is in a bright sunny location and not in a shady area during the day.
Make sure that the light's photocell is not affected by other light sources at night. Clean the photocell
regularly.
v002: 04/12/23
.
Material: Hand Carved Resin
17.5*20.5*47.5cm
Size:
Weight:1.6KGS
1x AA 1000mAh 1.2V
Battery:
2v 300ma
Solar panel:
55 x80mm
Non-replaceable LED lights

Advertisement

loading
Need help?

Need help?

Do you have a question about the G482 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gainsborough G482

  • Page 1 Solar Peacock Ornament Item codes: G482 Instructions for Use v002: 04/12/23 Please read and retain these instructions for future reference Material: Hand Carved Resin 17.5*20.5*47.5cm Size: Weight:1.6KGS 1x AA 1000mAh 1.2V Battery: 2v 300ma Solar panel: 55 x80mm ALWAYS USE ALKALINE BATTERIES.
  • Page 2 • Verify that the battery is making contact with the terminal and that it has been inserted in the correct polarity. • Ensure that the “ON/OFF” button is in the “ON” position. WARNINGS AND SAFETY INSTRUCTIONS: WHEN USING ANY APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED: •...
  • Page 3 • Be sure to insert the batteries in the proper direction. • Replace the battery compartment cover. BATTERY DISPOSAL • SPENT OR EXPIRED BUTTON CELLS MUST BE DISPOSED SAFELY AWAY FROM CHILDREN ACCESS AND RECYCLED IN COMPLIANCE WITH YOUR LOCAL AUTHORITY REGULATIONS. •...