Program Play - LENCO L-69 Instruction

Direct encoding turntable
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

PROGRAM PLAY

Allow you to program up to 32 tracks to play in any order, including repeating tracks.
1. When the playback is stopped, press the "ID3/PROG" button(8), the "PROG" indicator will flash.
2. Select a desired track by pressing "SKIP - DN"(14) or "SKIP - UP"(12) button. or by pressing "F - UP" button(9) to switch
between the folder.
3. Press the "ID3/PROG" button(8) to store the track into memory.
4. Repeat the steps 3 and 4 for additional tracks into the memory if necessary.
5. To play the programmed of desired tracked, press the "PLAY/PAUSE" button(16).
6. To cancel the program memory, press "STOP" button(20) until the "PROG" indicator disappears.
Model: L-69
Mains Voltage: 220 / 240 v ~ 50hz
Power Consumption: 14 w max.
Outputs: Audio output (cinch)
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Mains plug is used as the disconnect device and it shall remain readily operable. To be completely disconnected
the power input, the mains plug of the apparatus shall be disconnected from the mains completely.
Dripping warning : " The product shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the product."
Ventilation warning : " The normal ventilation of the product shall not be impeded for intended use."
- minimum distance 50mm around the apparatus for sufficient ventilations;
- no naked flame sources such as lighted candles should be placed on the apparatus;
- attention should be drawn to the envirnmental aspects of battery disposal;
- the use of apparatus in moderate climates
The marking is located at the bottom of the apparatus.
Mains plug is used as the disconnect device and it shall remain readily operable. To be completely disconnected
the power input, the mains plug of the apparatus shall be disconnected from the mains completely. The mains plug
should not be obstructed OR should be easily accessed during intended use.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on apparatus.
IF AT ANY TIME IN THE FUTURE YOU SHOULD NEED TO DISPOSE OF THIS PRODUCT PLEASE
NOTE THAT: WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD
WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR LOCAL AUTHORITY
OR RETAILER FOR RECYCLING ADVICE. (WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
DIRECTIVE)
E - 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents