Teltonika TRB140 Quick Start Manual
Hide thumbs
Also See for TRB140:
- Quick start manual (6 pages) ,
- Recovery manual (3 pages) ,
- Quick start manual (2 pages)
Advertisement
Quick Links
https://wiki.teltonika-networks.com/view/QSG_TRB140
QSG TRB140
Main Page
>
TRB Gateways
English
日本
This Wiki page contains the online version of the Quick Start Guide (QSG) for the TRB140
Gateway. Here you will find an overview of the various components on the front and back of a
TRB140 device, hardware installation instructions, first login information, device specifications, and
general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide
before using the device. You can also locate a printed version of the Quick Start Guide in the
packaging box of your device.
Contents
•
1 Safety information
-
1.1 General
-
1.2 ANATEL
-
1.3 NOM
-
1.4 RF exposure
-
1.5 Operating conditions
-
1.6 Faulty and damaged products
-
1.7 Electrical safety
-
1.8 Product handling
•
2 Front view
•
3 Back view
•
4 Connectors
•
5 Video Quick Start Guide
•
6 Hardware installation
•
7 Configure your computer LAN (Windows)
•
8 Login to device
•
9 SIM card recommendations
Safety information
Before starting operating the device, please review recommendations and precautions to minimize
the possibility of accidents. Safety precautions presented are supplementary and subject to the local
safety regulations. When various operations are executed on the device, the user must fully follow
the safety instructions and recommendations provided with the device.
General
RF technologies 2G, 3G, 4G
Max RF power 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE
>
TRB140
> QSG TRB140
Radio specifications
Bundled accessories specifications*
Advertisement
Related Manuals for Teltonika TRB140
Summary of Contents for Teltonika TRB140
- Page 1 English 日本 This Wiki page contains the online version of the Quick Start Guide (QSG) for the TRB140 Gateway. Here you will find an overview of the various components on the front and back of a TRB140 device, hardware installation instructions, first login information, device specifications, and general safety information.
- Page 2 ** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations. TRB140 gateway must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
- Page 3 [MT] Maltese mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħra tad Direttiva 2014/53/EU TELTONIKA NETWORKS Erklærer herved at TRB140 er i samsvar med de [NO] Norwegian grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU Niniejszym TELTONIKA NETWORKS deklaruje że TRB140 jest zgodny z [PL] Polish zasadniczymi wymaganiami i innymi właściwymi postanowieniami Dyrektywy...
- Page 4 RF exposure exceeding the applicable limits. External antennas used with TRB140 must be installed to provide a distance of at least 20 cm from any people and must not be co-located or operated in conjunction with any other antenna or transmitter.
- Page 5 Faulty and damaged products Do not attempt to disassemble the device or its accessories. Only qualified personnel must service or repair the device or its accessories. If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked at an authorized service center.
- Page 6 POWER SOCKET PINOUT Video Quick Start Guide Need some help setting up your new Teltonika Networks TRB140 Industrial 5G Gateway? Watch our quick start guide video and follow the step-by-step instructions to easily set up your new gateway for operation.
- Page 7 Configure your computer LAN (Windows) 1. Ensure the Network connection is Enabled. Go to Start — Control Panel — Network and Internet — Network and Sharing Center. Click on the Change adapter settings in the left panel, then right-click on Network Adapter, and select Enable.
- Page 8 1. To enter the gateway's Web interface (WebUI), type http://192.168.2.1 into the URL field of your Internet browser. 2. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving.
- Page 9 3. After logging in, you must set a new password for security reasons. You will not be able to interact with the gateway’s WebUI until the default password is changed. The new password must consist of a minimum of 8 characters.
- Page 10 environments with extreme temperatures, corrosive or extra humid climates, or hard-to- reach locations.
Need help?
Do you have a question about the TRB140 and is the answer not in the manual?
Questions and answers