Teltonika TRB245 Quick Start Manual

Teltonika TRB245 Quick Start Manual

Leds and their actions

Advertisement

https://wiki.teltonika-networks.com/view/TRB245_LEDs
TRB245 LEDs
Main Page
>
TRB Gateways
This wiki page contains information about TRB245 gateway LEDs and their actions.
Contents

1 Power LED

2 Ethernet port LEDs

Power LED
The power LED is located on the bottom left corner of the front panel, near the power connector:
It can perform two different actions:
LED turned ON
LED turned OFF
Ethernet port LEDs
The Ethernet port LEDs are located on the gateway front panel, in both upper corners on Ethernet
port:
Since TRB245 gateway supports Fast ethernet speeds,
represents information about ethernet connection activity:
LED
turned ON
LED
turned OFF
LED
blinking
LED
blinking fast simultaneously with connection and signal strength LEDs
* The bootloader menu is a special router state from which certain upgrades can be performed.
For more information on the bootloader menu, click
>
TRB245
>
TRB245 Manual
Action
Action
> TRB245 LEDs
Gateway is powered up
Gateway is not power up
green
LED is not used and only
Operating as a 10/100 Mbps connection
No link established
Connection established and there is activity (data being transferred)
Router is in the bootloader menu state*
here
Description
orange
Description
LED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TRB245 and is the answer not in the manual?

Questions and answers

Summary of Contents for Teltonika TRB245

  • Page 1 TRB Gateways > TRB245 > TRB245 Manual > TRB245 LEDs This wiki page contains information about TRB245 gateway LEDs and their actions. Contents 1 Power LED 2 Ethernet port LEDs 3 Connection status LED 4 Signal strength LEDs Power LED...
  • Page 2 While holding the reset button each lit up signal strength LED indicate that a period of two seconds has passed. In case with TRB245, when all 3 signal strength LEDs are lit up, they represent that 6 (LED number multiplied by 2) seconds have passed since you pressed down on the reset button.

Table of Contents