Start Mode Select; Default; Calendar; Stand Instruction - LENCO DF-1200 Manual

Table of Contents

Press

to the auto power ON/OFF setup menu, use

items as follows: hour, minute, mode（On /Off）, press

figures or choose the mode, then press OK to confirm.

5.11Start Mode select(Calendar/picture/Music/Video/Comb/Card Select)

Press

to choose start mode .Press OK to confirm, next time turning on the

unit，the setting will be effected.

Note: Make sure there are supported picture, photo and video files in the card

or USB device，then you can have all the startup effects：auto slideshow, auto

slideshow with background music, auto video playing, auto music playing,

calendar with slideshow，card select.

If there is no card or USB device, only Calendar Start Mode and Main Menu

Mode can be selected.

Use

to highlight , press OK to default values.

Insert the bracket into the slot of the digital photo frame. Please check and

make sure the stand is locked in place before standing the photo frame up.

Please refer to the illustration shown below.

Select CALEDARE in main menu and

press OK to access to the calendar

interface, use

previous year of the calendar, use

to show the last / next month of the

calendar. Time and alarm clock will be

showed on the top, if there are

supported pictures in the memory card,

you can view slideshow on the right.

to choose the set

to adjust the

to show the next/

Table of Contents