Getting Started; Operating Instruction; Picture Mode - LENCO DF-705 - V1.0 User Manual

3. Getting Started

3.1 Extend the digital photo frame bracket on the back of the frame to the
widest position for greatest stability, and then plug one end of the
included AC adapter into a standard 110-240V AC electrical outlet and the
other end into the right side the frame.
Note: There are different positions for the digital photo frame stand. Please
refer to "Stand Instruction".
3.2. Remove the protective film covering the LCD.
3.3. Remove the plastic battery insulator from the battery compartment and
make sure the remote control has a battery inside. Please refer to
"Installing & Replacing Battery" if you need a new battery.
3.4. Power on the unit by pressing the Power button on the remote control.

4. Operating Instruction

4.1 Picture Mode

After turning on the unit, it will
automatically slideshow pictures from
the CARD or USB.
When it is automatic slideshow, press
EXIT to the Thumbnail Mode. then
Use
you want to display.
7
to highlight the picture