Page 2
1. Declarations Notice for Europe This product is in conformity with the Council Directive 2014/30/EU Notice for Great Britain This product is in conformity with Electromagnetic Compatibility Regulations 2016 1628 Grablink Duo, 3623 Coaxlink Quad CXP-12 Value, PC3624 Coaxlink Quad CXP-12 DF, 3625 Coaxlink QSFP+ and 3614 HD26F I/O Extension Module - Standard I/O Set have been tested and found to comply with: Class B EN 55022 / CISPR 22 or EN 55032 / CISPR 32 electromagnetic emission requirements for □...
Page 3
Damage caused by improper handling is not covered by the manufacturer's warranty. Electromagnetic Compatibility Euresys boards are compliant with electromagnetic compatibility regulatory requirements. To ensure this compliance, the card bracket must be secured with the relevant screw in accordance with the procedure described herein.
Page 4
6. Software Setup Procedure Prior to use the board, it is necessary to install the driver and update or install the firmware. The eGrabber driver is available in the Coaxlink series section of the download area of the Euresys □...
Need help?
Do you have a question about the eGrabber PC1630 Coaxlink Mono and is the answer not in the manual?
Questions and answers