1. Manuals
  2. Brands
  3. Euresys Manuals
  4. PCI Card
  5. Coaxlink Mono
  6. Hardware manual

Euresys Coaxlink Mono Hardware Manual

Hide thumbs Also See for Coaxlink Mono:
Table of Contents

Advertisement

Quick Links

Coaxlink
Coaxlink Hardware Manual (PCIe bus type)
1630 Coaxlink Mono
1631 Coaxlink Duo
1632 Coaxlink Quad
1633 Coaxlink Quad G3
1633-LH Coaxlink Quad G3 LH
1635 Coaxlink Quad G3 DF
© EURESYS s.a. 2020 - Document D205ET-PCIe Hardware Manual-Coaxlink-12.7.2.2117 built on 2020-07-30
HARDWARE MANUAL
1637 Coaxlink Quad 3D-LLE
3602 Coaxlink Octo
3603 Coaxlink Quad CXP-12
3620 Coaxlink Quad CXP-12 JPEG
3621-LH Coaxlink Mono CXP-12 LH
3622 Coaxlink Duo CXP-12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Coaxlink Mono and is the answer not in the manual?

Questions and answers

Related Manuals for Euresys Coaxlink Mono

Summary of Contents for Euresys Coaxlink Mono

  • Page 1 3603 Coaxlink Quad CXP-12 1633 Coaxlink Quad G3 3620 Coaxlink Quad CXP-12 JPEG 1633-LH Coaxlink Quad G3 LH 3621-LH Coaxlink Mono CXP-12 LH 1635 Coaxlink Quad G3 DF 3622 Coaxlink Duo CXP-12 © EURESYS s.a. 2020 - Document D205ET-PCIe Hardware Manual-Coaxlink-12.7.2.2117 built on 2020-07-30...
  • Page 2 EURESYS s.a. shall not be liable for any loss of or damage to revenues, profits, goodwill, data, information systems or other special, incidental, indirect, consequential or punitive damages of any kind arising in connection with the use of the hardware or the software of EURESYS s.a.

  • Page 3: Table Of Contents

    Coaxlink Hardware Manual Contents 1. About This Document 1.1. Document Scope 2. Mechanical Specification 2.1. Board and Bracket Layouts 2.2. Connectors DIN 1 CoaXPress Host Connector DIN 2 CoaXPress Host Connector DIN 4 CoaXPress Host Connector DIN 8 CoaXPress Host Connector Micro-BNC 1 CoaXPress Host Connector Micro-BNC 2 CoaXPress Host Connector Micro-BNC 4 CoaXPress Host Connector...
  • Page 4 Coaxlink Hardware Manual 4.2. Temperature Monitor 4.3. Thermal Data 4.4. Compliances 5. Related Products & Accessories 5.1. 1625 DB25F I/O Adapter Cable 5.2. 1636 InterPC C2C-Link Adapter Hardware Description Using 1636 as HD26F I/O Adapter Using 1636 as C2C-Link Extender Adapter Powering InterPC Interconnect LEDs...

  • Page 5: About This Document

    Coaxlink Hardware Manual 1. About This Document 1.1. Document Scope...

  • Page 6: Document Scope

    1637 Coaxlink Quad 3D-LLE 3602 Coaxlink Octo 3603 Coaxlink Quad CXP-12 3620 Coaxlink Quad CXP-12 JPEG 3621-LH Coaxlink Mono CXP-12 LH 3622 Coaxlink Duo CXP-12 □ The S/N prefix is a 3-letter string at the beginning of the card serial number.
  • Page 7 Coaxlink Hardware Manual Related accessory products Product S/N Prefix Icon 1625 DB25F I/O Adapter Cable 1636 InterPC C2C-Link Adapter 3303 C2C-Link Ribbon Cable 3304 HD26F I/O Adapter Cable 3610 HD26F I/O Extension Module TTL-RS422 3612 HD26F I/O Extension Module TTL-CMOS5V-RS422 3614 HD26F I/O Extension Module - Standard I/O Set The S/N prefix is a 3-letter string at the beginning of the card serial number.

  • Page 8: Mechanical Specification

    Coaxlink Hardware Manual 2. Mechanical Specification Mechanical specifications of the product(s) including: product pictures, physical dimensions, connectors description and pin assignments, LEDs description, switches description, etc. 2.1. Board and Bracket Layouts 2.2. Connectors 2.3. LEDs 2.4. Firmware Recovery Switch 2.5. Physical Characteristics...

  • Page 9: Board And Bracket Layouts

    Coaxlink Hardware Manual 2.1. Board and Bracket Layouts...
  • Page 10 Coaxlink Hardware Manual 1630 Coaxlink Mono "DIN 1 CoaXPress Host Connector" on page 23 "CoaXPress LED lamps" on page 53 ● ● "External I/O Connector" on page 31 "Board Status LED" on page 55 ● ● ● "Internal I/O 1 Connector" on page 40 ●...
  • Page 11 Coaxlink Hardware Manual 1631 Coaxlink Duo "DIN 2 CoaXPress Host Connector" on page 24 "CoaXPress LED lamps" on page 53 ● ● "External I/O Connector" on page 31 "Board Status LED" on page 55 ● ● ● "Internal I/O 1 Connector" on page 40 ● "FPGA Status LED"...
  • Page 12 Coaxlink Hardware Manual 1632 Coaxlink Quad "DIN 4 CoaXPress Host Connector" on page 25 "CoaXPress LED lamps" on page 53 ● ● "External I/O Connector" on page 31 "Board Status LED" on page 55 ● ● ● "Internal I/O 1 Connector" on page 40 ● "FPGA Status LED"...
  • Page 13 Coaxlink Hardware Manual 1633 Coaxlink Quad G3 "DIN 4 CoaXPress Host Connector" on page 25 "CoaXPress LED lamps" on page 53 ● ● "External I/O Connector" on page 31 "Board Status LED" on page 55 ● ● ● "Internal I/O 1 Connector" on page 40 ●...
  • Page 14 Coaxlink Hardware Manual 1633-LH Coaxlink Quad G3 LH "DIN 4 CoaXPress Host Connector" on page 25 "CoaXPress LED lamps" on page 53 ● ● "External I/O Connector" on page 31 "Board Status LED" on page 55 ● ● ● "Internal I/O 1 Connector" on page 40 ●...
  • Page 15 Coaxlink Hardware Manual 1635 Coaxlink Quad G3 DF "DIN 4 CoaXPress Host Connector" on page 25 "CoaXPress LED lamps" on page 53 ● ● "CoaXPress Data Forwarding Connector" on "Board Status LED" on page 55 ● ● page 30 ● "FPGA Status LED" on page 56 ●...
  • Page 16 Coaxlink Hardware Manual 1637 Coaxlink Quad 3D-LLE "DIN 4 CoaXPress Host Connector" on page 25 "CoaXPress LED lamps" on page 53 ● ● "External I/O Connector" on page 31 "Board Status LED" on page 55 ● ● ● "Internal I/O 1 Connector" on page 40 ●...
  • Page 17 Coaxlink Hardware Manual 3602 Coaxlink Octo "DIN 8 CoaXPress Host Connector" on page 26 "CoaXPress LED lamps" on page 53 ● ● "I/O Extension Connector" on page 48 "Board Status LED" on page 55 ● ● ● "Internal I/O 1 Connector" on page 40 ● "FPGA Status LED"...
  • Page 18 Coaxlink Hardware Manual 3603 Coaxlink Quad CXP-12 "Micro-BNC 4 CoaXPress Host Connector" on "CoaXPress LED lamps" on page 53 ● ● page 29 "Board Status LED" on page 55 ● "I/O Extension Connector" on page 48 ● ● "FPGA Status LED" on page 56 ● "External I/O Connector"...
  • Page 19 Coaxlink Hardware Manual 3620 Coaxlink Quad CXP-12 JPEG "Micro-BNC 4 CoaXPress Host Connector" on "CoaXPress LED lamps" on page 53 ● ● page 29 "Board Status LED" on page 55 ● "I/O Extension Connector" on page 48 ● ● "FPGA Status LED" on page 56 ●...
  • Page 20 Coaxlink Hardware Manual 3621-LH Coaxlink Mono CXP-12 LH ● "Micro-BNC 1 CoaXPress Host Connector" on ● "CoaXPress LED lamps" on page 53 page 27 "Board Status LED" on page 55 ● "I/O Extension Connector" on page 48 ● ● "FPGA Status LED" on page 56 ●...
  • Page 21 Coaxlink Hardware Manual 3622 Coaxlink Duo CXP-12 ● "Micro-BNC 2 CoaXPress Host Connector" on ● "CoaXPress LED lamps" on page 53 page 28 "Board Status LED" on page 55 ● "I/O Extension Connector" on page 48 ● ● "FPGA Status LED" on page 56 ● "External I/O Connector"...

  • Page 22: Connectors

    Coaxlink Hardware Manual 2.2. Connectors...

  • Page 23: Din 1 Coaxpress Host Connector

    Coaxlink Hardware Manual DIN 1 CoaXPress Host Connector Applies to: Connector description Property Value Name CoaXPress Host Type DIN 1.0/2.3 75 Ohms coaxial female receptacle Location Card bracket Usage CoaXPress Host Interface Pin assignments Signal Usage Inner CXP_A CoaXPress Host Connection A Outer Ground...

  • Page 24: Din 2 Coaxpress Host Connector

    Coaxlink Hardware Manual DIN 2 CoaXPress Host Connector Applies to: Connector description Property Value Name CoaXPress Host Type 2 x DIN 1.0/2.3 75 Ohms coaxial receptacles Location Card bracket Usage CoaXPress Host Interface Pin assignments Signal Usage Inner1 CXP_A CoaXPress Host Connection A Outer1 Ground Inner2...

  • Page 25: Din 4 Coaxpress Host Connector

    Coaxlink Hardware Manual DIN 4 CoaXPress Host Connector Applies to: Connector description Property Value Name CoaXPress Host Type 4 x DIN 1.0/2.3 75 Ohms coaxial receptacles Location Card bracket Usage CoaXPress Host Interface Pin assignments Signal Usage Inner1 CXP_A CoaXPress Host Connection A Outer1 Ground Inner2...

  • Page 26: Din 8 Coaxpress Host Connector

    Coaxlink Hardware Manual DIN 8 CoaXPress Host Connector Applies to: Connector description Property Value Name CoaXPress Host Type 8 x DIN 1.0/2.3 75 Ohms coaxial receptacles Location Card bracket Usage CoaXPress Host Interface Pin assignments Signal Usage Inner1 CXP_A CoaXPress Host Connection A Outer1 Ground Inner2...

  • Page 27: Micro-Bnc 1 Coaxpress Host Connector

    Coaxlink Hardware Manual Micro-BNC 1 CoaXPress Host Connector Applies to: Connector description Property Value Name CoaXPress Host Type Micro-BNC 75 Ohms coaxial receptacle Location Card bracket Usage CoaXPress Host Interface Pin assignments Signal Usage Inner1 CXP_A CoaXPress Host Connection A Outer1 Ground...

  • Page 28: Micro-Bnc 2 Coaxpress Host Connector

    Coaxlink Hardware Manual Micro-BNC 2 CoaXPress Host Connector Applies to: Connector description Property Value Name CoaXPress Host Type 2 x Micro-BNC 75 Ohms coaxial receptacles Location Card bracket Usage CoaXPress Host Interface Pin assignments Signal Usage Inner1 CXP_A CoaXPress Host Connection A Outer1 Ground Inner2...

  • Page 29: Micro-Bnc 4 Coaxpress Host Connector

    Coaxlink Hardware Manual Micro-BNC 4 CoaXPress Host Connector Applies to: Connector description Property Value Name CoaXPress Host Type 4 x Micro-BNC 75 Ohms coaxial receptacles Location Card bracket Usage CoaXPress Host Interface Pin assignments Signal Usage Inner1 CXP_A CoaXPress Host Connection A Outer1 Ground Inner2...

  • Page 30: Coaxpress Data Forwarding Connector

    Coaxlink Hardware Manual CoaXPress Data Forwarding Connector Applies to: Connector description Property Value Name CoaXPress Data Forwarding Type 4 x DIN 1.0/2.3 75 Ohms coaxial receptacles Location Card bracket Usage CoaXPress Data Forwarding Interface Pin assignments Signal Usage Inner1 CXP_FA CoaXPress Data Forwarding Connection A Outer1 Ground...

  • Page 31: External I/O Connector

    Coaxlink Hardware Manual External I/O Connector Applies to: Connector description Property Value Name External I/O Type 26-pin 3-row high-density female sub-D connector Location Card bracket Usage General purpose I/O and power output Pin assignments Signal Usage Ground DIN12+ High-speed differential input #12 – Positive pole IIN11+ Isolated input #11 –...
  • Page 32 Coaxlink Hardware Manual Signal Usage IOUT12+ Isolated contact output #12 – Positive pole TTLIO12 TTL input/output #12 Ground DIN11- High-speed differential input #11 – Negative pole DIN11+ High-speed differential input #11 – Positive pole IIN12- Isolated input #12 – Negative pole IOUT11- Isolated contact output #11 –...

  • Page 33: External I/O Connector

    Coaxlink Hardware Manual External I/O Connector Applies to: Connector description Property Value Name External I/O Type 15-pin 3-row high-density female sub-D connector Location Card bracket Usage General purpose I/O and power output Pin assignments Signal Usage DIN12+ High-speed differential input #12 – Positive pole IIN11+ Isolated input #11 –...

  • Page 34: 3610/3612 External I/O Connector

    Coaxlink Hardware Manual 3610/3612 External I/O Connector Applies to: Connector description Property Value Name External I/O Type 26-pin 3-row high-density female sub-D connector Location Card bracket Usage General purpose I/O and power output Pin assignments Signal Usage Ground MIO03 Single-ended I/O #3 or differential I/O #3 positive pole MIO05 Single-ended I/O #5 or differential I/O #5 positive pole Ground...
  • Page 35 Coaxlink Hardware Manual Signal Usage MIO13 Single-ended I/O #13 or differential I/O #13 positive pole MIO17 Single-ended I/O #17 or differential I/O #17 positive pole MIO20 Single-ended I/O #20 or differential I/O #19 negative pole MIO02 Single-ended I/O #2 or differential I/O #1 negative pole MIO01 Single-ended I/O #1 or differential I/O #1 positive pole MIO08...

  • Page 36: 3614 External I/O 1 Connector

    Coaxlink Hardware Manual 3614 External I/O 1 Connector Applies to: Connector description Property Value Name External I/O 1 Type 26-pin 3-row high-density female sub-D connector Location Card bracket Usage General purpose I/O and power output Pin assignments Signal Usage Ground DIN12+ High-speed differential input #12 –...
  • Page 37 Coaxlink Hardware Manual Signal Usage IOUT12+ Isolated contact output #12 – Positive pole TTLIO12 TTL input/output #12 Ground DIN11- High-speed differential input #11 – Negative pole DIN11+ High-speed differential input #11 – Positive pole IIN12- Isolated input #12 – Negative pole IOUT11- Isolated contact output #11 –...

  • Page 38: 3614 External I/O 2 Connector

    Coaxlink Hardware Manual 3614 External I/O 2 Connector Applies to: Connector description Property Value Name External I/O 2 Type 26-pin 3-row high-density female sub-D connector Location Card bracket Usage General purpose I/O and power output Pin assignments Signal Usage Ground DIN22+ High-speed differential input #22 –...
  • Page 39 Coaxlink Hardware Manual Signal Usage IOUT22+ Isolated contact output #22 – Positive pole TTLIO22 TTL input/output #22 Ground DIN21- High-speed differential input #21 – Negative pole DIN21+ High-speed differential input #21 – Positive pole IIN22- Isolated input #22 – Negative pole IOUT21- Isolated contact output #21 –...

  • Page 40: Internal I/O 1 Connector

    Coaxlink Hardware Manual Internal I/O 1 Connector Applies to: Connector description Property Value Name Internal I/O 1 Type 26-pin dual-row 0.1" pitch pin header with shrouding Location Printed circuit board Usage General purpose I/O and power output Pin assignments Signal Usage Ground Ground...
  • Page 41 Coaxlink Hardware Manual Signal Usage IOUT11+ Isolated contact output #11 – Positive pole IOUT11- Isolated contact output #11 – Negative pole IOUT12+ Isolated contact output #12 – Positive pole IOUT12- Isolated contact output #12 – Negative pole TTLIO11 TTL input/output #11 Ground TTLIO12 TTL input/output #12...

  • Page 42: Internal I/O 2 Connector

    Coaxlink Hardware Manual Internal I/O 2 Connector Applies to: Connector description Property Value Name Internal I/O 2 Type 26-pin dual-row 0.1" pitch pin header with shrouding Location Printed circuit board Usage General purpose I/O and power output Pin assignments Signal Usage Ground Ground...
  • Page 43 Coaxlink Hardware Manual Signal Usage IOUT21+ Isolated contact output #21 – Positive pole IOUT21- Isolated contact output #21 – Negative pole IOUT22+ Isolated contact output #22 – Positive pole IOUT22- Isolated contact output #22 – Negative pole TTLIO21 TTL input/output #21 Ground TTLIO22 TTL input/output #22...

  • Page 44: 3610/3612 Internal I/O Connector

    Coaxlink Hardware Manual 3610/3612 Internal I/O Connector Applies to: Connector description Property Value Name Internal I/O Type 26-pin dual-row 0.1" pitch pin header with shrouding Location Printed circuit board Usage General purpose I/O and power output Pin assignments Signal Usage Ground Ground MIO01...
  • Page 45 Coaxlink Hardware Manual Signal Usage MIO12 Single-ended I/O #12 or differential I/O #11 negative pole MIO13 Single-ended I/O #13 or differential I/O #13 positive pole MIO14 Single-ended I/O #14 or differential I/O #13 negative pole MIO15 Single-ended I/O #15 or differential I/O #15 positive pole MIO16 Single-ended I/O #16 or differential I/O #15 negative pole MIO17...

  • Page 46: 3614 Internal I/O 2 Connector

    Coaxlink Hardware Manual 3614 Internal I/O 2 Connector Applies to: Connector description Property Value Name Internal I/O 2 Type 26-pin dual-row 0.1" pitch pin header with shrouding Location Printed circuit board Usage General purpose I/O and power output Pin assignments Signal Usage Ground...
  • Page 47 Coaxlink Hardware Manual Signal Usage IOUT21- Isolated contact output #21 – Negative pole IOUT22+ Isolated contact output #22 – Positive pole IOUT22- Isolated contact output #22 – Negative pole TTLIO21 TTL input/output #21 Ground TTLIO22 TTL input/output #22 Ground Not connected Ground +12V +12 V Power output...

  • Page 48: I/O Extension Connector

    Coaxlink Hardware Manual I/O Extension Connector Applies to: Connector description Property Value Name I/O Extension Type 26-pin dual-row 0.050" pitch pin header with shrouding Location Printed circuit board Usage I/O extension cable socket Pin assignments Signal Usage IOEXT1WIRE 1-wire serial I/O Ground IOEXT01 I/O Extension #1...
  • Page 49 Coaxlink Hardware Manual Signal Usage +3V3 +3.3 V Power IOEXT08 I/O Extension #8 Ground IOEXT09 I/O Extension #9 12V Power IOEXT10 I/O Extension #10 Ground IOEXT11 I/O Extension #11 12V Power IOEXT12 I/O Extension #12 Ground...

  • Page 50: C2C-Link Connector

    Coaxlink Hardware Manual C2C-Link Connector Applies to: Connector description Property Value Name C2C-Link Type 6-pin dual-row 0.1" pitch pin header with shrouding Location Printed circuit board Usage Card-to-card link Pin assignments Signal Usage Ground CSync1 Card-to-card synchronization bus – Signal 1 Ground CSync2 Card-to-card synchronization bus –...

  • Page 51: Auxiliary Power Input Connector

    Coaxlink Hardware Manual Auxiliary Power Input Connector Applies to: Connector description Property Value Name Auxiliary Power Input Type 6-pin PCI Express x16 Graphics 150W ATX power socket connector Location Printed circuit board Usage DC power input for PoCXP and GPIO power output Pin assignments Signal Usage...

  • Page 52: Leds

    Coaxlink Hardware Manual 2.3. LEDs...

  • Page 53: Coaxpress Led Lamps

    Coaxlink Hardware Manual CoaXPress LED lamps Each connector of the CoaXPress Host Interface is associated with a LED lamp mounted on the bracket (for PCie cards only). LED lamps mode control LampMode feature of the Interface module defines the lamps operation mode: ●...
  • Page 54 Coaxlink Hardware Manual Symbol Indication State Solid red PoCXP over-current Device / Host connected, but no data being Solid green transferred Device / Host connected, waiting for event (e.g. Flash_1 orange trigger, exposure pulse) Flash_12_5 green Device / Host connected, data being transferred Error during data transfer (e.g.

  • Page 55: Board Status Led

    Coaxlink Hardware Manual Board Status LED Board status LED indicator states Symbol Meaning state No power. The board is not powered or the power distribution network is not functional. Board status OK. Solid The main power distribution network is operational and the FPGA start-up green procedure has successfully completed.

  • Page 56: Fpga Status Led

    Coaxlink Hardware Manual FPGA Status LED FPGA status LED indicator states Symbol Meaning state Board not powered. FPGA status OK. Solid green All the FPGA clock networks and the DDR memory are operating normally. FPGA status NOK. Possible causes are: At least one FPGA clock network is not operating normally.

  • Page 57: Firmware Recovery Switch

    Coaxlink Hardware Manual 2.4. Firmware Recovery Switch Introduction The firmware recovery switch is implemented with a 3-pin 1-row header and a jumper. The jumper has two positions: normal and recovery. Normal position At the next power ON, the latest firmware successfully written into the Flash EEPROM is used to program the FPGA.
  • Page 58 Coaxlink Hardware Manual 1633 Coaxlink Quad G3, 1633-LH Coaxlink Quad G3 LH, 1637 Coaxlink Quad 3D-LLE 1635 Coaxlink Quad G3 DF, 3601 Coaxlink CoaXPress Simulator NOTE The normal position of the jumper (i.e. bracket side) is common to all Coaxlink PCI Express cards.

  • Page 59: Physical Characteristics

    3620 Coaxlink Quad CXP-12 167.65 mm, 6.6 in 111.15 mm, 4.38 in 196 g, 6.91 oz JPEG 3621-LH Coaxlink Mono CXP-12 167.65 mm, 6.6 in 68.9 mm, 2.71 in 160 g, 5.64 oz 3622 Coaxlink Duo CXP-12 167.65 mm, 6.6 in 68.9 mm, 2.71 in...

  • Page 60: Electrical Specification

    Coaxlink Hardware Manual 3. Electrical Specification Electrical specification of the product(s) including: electrical characteristics of all the input/output ports, description of the power distribution, power requirements, etc. 3.1. CoaXPress Host Interface 3.2. PCI Express Interface 3.3. Power Distribution 3.4. PCI Express Power 3.5.

  • Page 61: Coaxpress Host Interface

    "CXP-12 Host Transceiver" on the next page 3620 Coaxlink Quad CXP-12 JPEG "CXP-12 Host Transceiver" on the next page 3621-LH Coaxlink Mono CXP-12 LH "CXP-12 Host Transceiver" on the next page 3622 Coaxlink Duo CXP-12 "CXP-12 Host Transceiver" on the next page...
  • Page 62 Coaxlink Hardware Manual CXP-12 Host Transceiver Applies to: The Host transceiver implements a high-speed cable receiver and a low-speed cable driver for CXP-12 speeds. It fulfills the electrical specification of the CoaXPress 2.0 standard. Namely: ● The cable receiver requirements for the high-speed connection described in Table 2 of the Annex B of the CoaXPress Standard Version 2.0 ●...
  • Page 63 Coaxlink Hardware Manual CXP-6 Host Transceiver Applies to: The Host transceiver implements a high-speed cable receiver and a low-speed cable driver for CXP-6 speeds. It fulfills the electrical specification of the CoaXPress 1.1 standard. Namely: ● The cable receiver requirements for the high-speed connection described in Table 2 of the Annex B of the CoaXPress Standard 1.1 ●...
  • Page 64 OCP holding current OCP nominal trip current Device detection sense resistance kΩ NOTE (*) 25 W for 3621-LH Coaxlink Mono CXP-12 LH NOTE The above specification applies over the whole operating temperature range of the Coaxlink card. See also: Refer to...

  • Page 65: Pci Express Interface

    "8-lane Rev 3.0 PCIe end-point" on the next page 3620 Coaxlink Quad CXP-12 JPEG "8-lane Rev 3.0 PCIe end-point" on the next page 3621-LH Coaxlink Mono CXP-12 LH "4-lane Rev 3.0 PCIe end-point " on page 67 3622 Coaxlink Duo CXP-12...
  • Page 66 Coaxlink Hardware Manual 8-lane Rev 3.0 PCIe end-point Applies to: The 8-lane Rev 3.0 PCIe end-point: ● complies with Revision 3.0 of the PCI Express Card Electromechanical specification. ● supports 1-lane, 2-lane, 4-lane and 8-lane link width supports PCIe Rev 3.0 link speed (8.0 GT/s with 128b/130b coding) ●...
  • Page 67 Coaxlink Hardware Manual 4-lane Rev 3.0 PCIe end-point Applies to: The 4-lane Rev 3.0 PCIe end-point: ● complies with Revision 3.0 of the PCI Express Card Electromechanical specification. ● supports 1-lane, 2-lane, and 4-lane link width supports PCIe Rev 3.0 link speed (8.0 GT/s with 128b/130b coding) ●...
  • Page 68 Coaxlink Hardware Manual 4-lane Rev 2.0 PCIe end-point Applies to: The 4-lane Rev 2.0 PCIe end-point: ● complies with Revision 2.0 of the PCI Express Card Electromechanical specification. ● supports 1-lane, 2-lane, and 4-lane link width supports PCIe Rev 2.0 link speed (5.0 GT/s with 8b/10b coding) ●...

  • Page 69: Power Distribution

    Coaxlink Hardware Manual 3.3. Power Distribution Introduction The power distribution of a Coaxlink PCIe product has two distinct distribution networks: The main power distribution network ● ● The auxiliary power distribution network Main power distribution network The main power distribution network delivers power to all the on-board electronic devices including FPGA, memory chips, CoaXPress transceivers, I/O drivers and receivers, fan motor.
  • Page 70 PoCXP transmitter unit designated by CxpPoCxpHostConnectionSelector. NOTE The Coaxlink card can be operated without applying power to the auxiliary power distribution network. Power distribution schemes per product 1630 Coaxlink Mono power distribution scheme...
  • Page 71 Coaxlink Hardware Manual 1631 Coaxlink Duo power distribution scheme...
  • Page 72 Coaxlink Hardware Manual 1632 Coaxlink Quad power distribution scheme 1633 Coaxlink Quad G3 power distribution scheme...
  • Page 73 Coaxlink Hardware Manual 1633-LH Coaxlink Quad G3 LH power distribution scheme 1635 Coaxlink Quad G3 DF power distribution scheme...
  • Page 74 Coaxlink Hardware Manual 1637 Coaxlink Quad 3D-LLE power distribution scheme 3602 Coaxlink Octo power distribution scheme...
  • Page 75 Coaxlink Hardware Manual 3603 Coaxlink Quad CXP-12 power distribution scheme 3620 Coaxlink Quad CXP-12 JPEG power distribution scheme...
  • Page 76 Coaxlink Hardware Manual 3621-LH Coaxlink Mono CXP-12 LH power distribution scheme 3622 Coaxlink Duo CXP-12 power distribution scheme NOTE The fuses are not serviceable! When blown, the card must be returned □ to the factory. Electronic fuses are self-resettable fuses.

  • Page 77: Pci Express Power

    16.8 1637 Coaxlink Quad 3D-LLE 16.8 3602 Coaxlink Octo 11.8 3603 Coaxlink Quad CXP-12 17.1 3620 Coaxlink Quad CXP-12 JPEG 11.8 18.1 3621-LH Coaxlink Mono CXP-12 LH 11.5 3622 Coaxlink Duo CXP-12 10.5 14.8 Voltage requirements Parameter Min. Typ. Max.

  • Page 78: Auxiliary Power

    Coaxlink Hardware Manual 3.5. Auxiliary Power Applies to PCI Express products only! PCIe products with one PoCXP Applies to: Parameter Conditions Min. Typ. Max. Units DC input voltage DC input power for I/O 12 W I/O output power DC input power for PoCXP 17 W PoCXP output power PoCXP output voltage Power conversion efficiency...
  • Page 79 Coaxlink Hardware Manual PCIe products with four PoCXP Applies to: Parameter Conditions Min. Typ. Max. Units DC input voltage DC input power for I/O 12 W I/O output power DC input power for PoCXP 68 W total PoCXP output power PoCXP output voltage Power conversion efficiency 92.5...

  • Page 80: I/O Power Output

    Coaxlink Hardware Manual 3.6. I/O Power Output Specification of the +12 V power output of the I/O connector A non-isolated +12 V power output is available on every I/O connector. The power originates from an external 12 V power supply plugged into the Auxiliary Power Input connector.

  • Page 81: Differential Input

    Coaxlink Hardware Manual 3.7. Differential Input Differential Input Simplified Schematic The receiver complies with the ANSI/TIA/EIA-422B specification. DC Characteristics Parameter Conditions Min. Typ. Max. Units Common mode voltage Differential sensitivity Input impedance Human Body Model (HBM) ESD protection Contact discharge Air gap discharge AC characteristics Parameter...
  • Page 82 Coaxlink Hardware Manual Logical map The state of the port is reported as follows: Relative V+/V- voltage Logical State V+ > V- HIGH V+ < V- Unconnected input HIGH Compatible drivers The following drivers are compatible with the high-speed differential input ports: ●...

  • Page 83: Differential Input/Output

    Coaxlink Hardware Manual 3.8. Differential Input/Output Applies to: Differential Input/Output Simplified Schematic The driver and the receiver complies with the ANSI/TIA/EIA-422B specification. DC Characteristics Parameter Conditions Min. Typ. Max. Units Common mode voltage Input impedance Human Body Model (HBM) ESD protection Contact discharge Air gap discharge Driver...
  • Page 84 Coaxlink Hardware Manual AC characteristics Driver Parameter Min. Typ. Max. Units Pulse width Pulse rate 10%-90% rise/fall time µs Receiver Parameter Min. Typ. Max. Units Pulse width Pulse rate 10%-90% rise/fall time µs Logical map The state of the port is as follows: Relative V+/V- voltage Logical State V+ >...

  • Page 85: Ttl Input/Output (Version 1)

    Coaxlink Hardware Manual 3.9. TTL Input/Output (Version 1) Applies to: TTL Input/Output Simplified schematic The port implements a 3.3 V LVTTL driver and a 5 V-compliant 3.3 V LVTTL receiver.
  • Page 86 Coaxlink Hardware Manual DC characteristics Parameter Conditions Min. Typ. Max. Units ESD protection Human Body Model (HBM) NOTE The I/O port includes a latch-up protection. Driver Parameter Conditions Min. Typ. Max. Units Low-level output current @ 8 mA 0.34 0.36 @ 16 mA 0.48 0.55...
  • Page 87 Coaxlink Hardware Manual Logical Map The state of the port is reported as follows: Input voltage Logical State VIN > 2.0 V HIGH VIN < 0.8 V Unconnected input port Undetermined Compatible sources Sources with the following drivers are compatible: □...

  • Page 88: Ttl Input/Output (Version 2)

    Coaxlink Hardware Manual 3.10. TTL Input/Output (Version 2) Applies to: TTL Input/Output Simplified schematic The port implements a 3.3 V LVTTL driver and a 5 V-compliant 3.3 V LVTTL receiver.
  • Page 89 Coaxlink Hardware Manual DC characteristics Parameter Conditions Min. Typ. Max. Units ESD protection Human Body Model (HBM) NOTE The I/O port includes a latch-up protection. Driver Parameter Conditions Min. Typ. Max. Units Low-level output current @ 8 mA 0.34 0.36 @ 16 mA 0.48 0.55...
  • Page 90 Coaxlink Hardware Manual AC characteristics Driver Parameter Conditions Min. Typ. Max. Units Pulse width Pulse rate 10%-90% rise time 10%-90% fall time Receiver Parameter Conditions Min. Typ. Max. Units Pulse width Pulse rate Logical Map The state of the port is reported as follows: Input voltage Logical State VIN >...

  • Page 91: Ttl Input/5 V Cmos Output

    Coaxlink Hardware Manual 3.11. TTL Input/5 V CMOS Output Applies to: TTL Input/5 V CMOS Output Simplified schematic The port implements a 5 V CMOS driver and a TTL-compliant receiver.
  • Page 92 Coaxlink Hardware Manual DC characteristics Parameter Conditions Min. Typ. Max. Units ESD protection Human Body Model (HBM) NOTE The I/O port includes a latch-up protection. Driver Parameter Conditions Min. Typ. Max. Units Absolute maximum voltage rating Low-level output current @50µA 0.001 Low-level output voltage @ 24 mA...
  • Page 93 Coaxlink Hardware Manual Logical Map The state of the port is reported as follows: Input voltage Logical State VIN > 2.0 V HIGH VIN < 0.8 V Unconnected input port Undetermined Compatible sources Sources with the following drivers are compatible: □...

  • Page 94: Ttl, 5 V Cmos And Lvttl Levels

    Coaxlink Hardware Manual 3.12. TTL, 5 V CMOS and LVTTL Levels Colors legend Dark gray: noise margin, □ □ Light gray: transition range, low and high level are unspecified Voltage levels □ maximum low-state voltage @receiver input □ VIH: minimum high-state voltage @receiver input □...

  • Page 95: Isolated Input

    Coaxlink Hardware Manual 3.13. Isolated Input Specification of the isolated GPIO input ports Isolated Input Simplified schematic The input port implements an isolated current-sense input. DC characteristics> Parameter Conditions Min. Typ. Max. Units Differential voltage Input current threshold Differential voltage @1 mA 1.65 @(VIN+ - VIN-) = 1.65 V...
  • Page 96 Coaxlink Hardware Manual Input Current vs. Input Voltage Characteristics AC characteristics Parameter Min. Typ. Max. Units Pulse width µs Pulse rate Logical map The state of the port is reported as follows: Input current Logical State IIN > 1 mA HIGH IIN <...
  • Page 97 Coaxlink Hardware Manual NOTE □ The +12 V power supply on the I/O connector(s) can be used for powering drivers requiring a power supply. No external resistors are required. However, to obtain the best noise □ immunity with 12 V and 24 V signaling, it is recommended to insert a series resistor in the circuit.

  • Page 98: Isolated Output

    Coaxlink Hardware Manual 3.14. Isolated Output Specification of the isolated GPIO output ports Isolated Output Simplified schematic The output port implements an isolated contact output. DC characteristics> Parameter Conditions Min. Typ. Max. Units Current Open state Differential voltage Closed state @ 1 mA Closed state @ 100 mA DC isolation voltage AC isolation voltage...
  • Page 99 Coaxlink Hardware Manual AC characteristics Parameter Min. Typ. Max. Units Pulse rate Turn-on time µs Turn-off time µs Typical switching performance @ 25°C Current [mA] Turn ON time [µs] Turn OFF time [µs] Logical map The state of the output port is determined as follows: Logical State Output port state HIGH...

  • Page 100: Environmental Specification

    Coaxlink Hardware Manual 4. Environmental Specification Environmental specification of the product(s) including: climatic requirements, electromagnetic standards compliance statements, safety standards compliance statements, etc. 4.1. Environmental Conditions 4.2. Temperature Monitor 4.3. Thermal Data 4.4. Compliances...

  • Page 101: Environmental Conditions

    Coaxlink Hardware Manual 4.1. Environmental Conditions Storage and operating conditions specification of standard climatic class products Storage Conditions Applies to: Parameter Conditions Units Ambient air temperature -20 [-4] 70 [158] °C [°F] Ambient air humidity Non-condensing % RH Operating Conditions Applies to: Parameter Conditions...

  • Page 102: Temperature Monitor

    Coaxlink Hardware Manual WARNING Exceeding the upper limit of the FPGA die temperature can permanently damage the card. 4.2. Temperature Monitor FPGA die temperature sensor All Coaxlink frame grabbers embed a temperature sensor on the FPGA die. When the TemperatureSensorSelector feature of the Interface Module is set to Grabber, the Temperature feature of the Interface Module reports the FPGA die temperature expressed in °C.
  • Page 103 Coaxlink Hardware Manual FPGA die temperature error Applies to: Random errors could occur in the FPGA if its core temperature becomes excessive. Therefore, for security reasons, the stream acquisition is stopped when the measured FPGA die temperature reaches 103°C! The "FPGA temperature is too high; stopping operation to prevent damaging the card" Memento message is sent repeatedly every second until the measured temperature decreases below 97°C.

  • Page 104: Thermal Data

    PoCXP output power per connector and a worst case 24 V DC/DC converter efficiency of 92.5%. (*) 25 W for 3621-LH Coaxlink Mono CXP-12 LH Generated heat power estimation and cooling method The following table shows the estimated heat power generated by the card for two use cases: Heat power 1: when the card doesn't deliver any PoCXP power Heat power 2: when the card delivers the maximum PoCXP power on all connectors.
  • Page 105 Coaxlink Hardware Manual Requirements for air-cooled products with fan The heat is dissipated into the ambient air inside the Host PC. The heat exchange is facilitated by a heat sink and a fan mounted on the FPGA (the component having the largest heat source). The thermal design must ensure sufficient air flow along both sides to keep the FPGA die temperature below the upper limit of the allowed temperature range.

  • Page 106: Compliances

    Coaxlink Hardware Manual 4.4. Compliances Compliance statements. CE compliance statement Applies to: Notice for Europe This product is in conformity with the Council Directive 2014/30/EU This piece of equipment has been tested and found to comply with Class B EN55022/CISPR22 electromagnetic emission requirements and Class A EN55024/CISPR24 electromagnetic susceptibility.
  • Page 107 Coaxlink Hardware Manual If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●...

  • Page 108: Related Products & Accessories

    Coaxlink Hardware Manual 5. Related Products & Accessories 5.1. 1625 DB25F I/O Adapter Cable 5.2. 1636 InterPC C2C-Link Adapter 5.3. 3303 C2C-Link Ribbon Cable 5.4. 3304 HD26F I/O Adapter Cable 5.5. 3610/3612 I/O Extension Modules 5.6. 3614 I/O Extension Module 5.7. Custom C2C-Link Ribbon Cable Assembly...

  • Page 109: 1625 Db25F I/O Adapter Cable

    Coaxlink Hardware Manual 5.1. 1625 DB25F I/O Adapter Cable Applies to: 1625 DB25F I/O Adapter Cable The 1625 DB25F I/O Adapter Cable connects all the pins (but the pin 1) of a 26-pin dual-row 0.1" pitch connector to a 25-pin female SubD connector fitted into a standard-profile PC bracket.
  • Page 110 Coaxlink Hardware Manual Usage with Internal IO2 connector The adapter brings the second set of I/O lines and the +12 V power output to a bracket-mount SubD connector. The pins are assigned as follows: Wire Signal SubD Pin # Signal Description Pin # Name Ground...
  • Page 111 Coaxlink Hardware Manual Usage with Internal IO1 connector The adapter brings the second set of I/O lines and the +12 V power output to a bracket-mount SubD connector. The pins are assigned as follows: Wire IDC Pin SubD Signal Signal Description Pin # Name Ground...

  • Page 112: 1636 Interpc C2C-Link Adapter

    Coaxlink Hardware Manual 5.2. 1636 InterPC C2C-Link Adapter Pictures of 1636 InterPC C2C-Link Adapter The 1636 InterPC C2C-Link Adapter is an accessory product for use as an InterPC C2C-Link extender and/or as a HD26F I/O adapter. See also: "Hardware Description" on the next page for a hardware description of the C2C-Link extender.

  • Page 113: Hardware Description

    Coaxlink Hardware Manual Hardware Description Layout 1636 InterPC C2C-Link Adapter The 1636 InterPC C2C-Link Adapter product accessory is composed of: A printed circuit board assembly fitted with a standard-profile PC bracket. ● ● A 200-mm 26-way ribbon cable. A 3303 C2C-Link Ribbon Cable. ●...
  • Page 114 Coaxlink Hardware Manual See also: "Using 1636 as HD26F I/O Adapter" on the next page See also: "Using 1636 as C2C-Link Extender" on page 116 See also: "Using 1636 as C2C-Link Extender" on page 116. LEDs The IN connector and the OUT connector are each equipped with 2 green/yellow LEDs named respectively L1, L2, L3 and L4.

  • Page 115: Using 1636 As Hd26F I/O Adapter

    Coaxlink Hardware Manual Using 1636 as HD26F I/O Adapter To use 1636 InterPC C2C-Link Adapter as an HD26F I/O adapter: ● Plug the A-connector of the supplied 200-mm 26-way ribbon cable to the Internal I/O connector of the 1636 InterPC C2C-Link Adapter Plug the B-connector to the Internal I/O connector of the target card.

  • Page 116: Using 1636 As C2C-Link Extender

    Coaxlink Hardware Manual Using 1636 as C2C-Link Extender Adapter Powering WARNING The 1636 InterPC C2C-Link Adapter must be powered when it is used as a C2C-Link extender. The user has two options to supply power to the adapter: From the Coaxlink card +12 V power output through the 26-way ribbon cable attached to the ●...

  • Page 117: Leds

    Coaxlink Hardware Manual External wiring of a C2C-Link across 3 adapters. The external wiring of the C2C-Link is made with RJ 45 CAT 5 STP straight LAN cables. N-1 cables are required to interconnect N adapters in a daisy-chain scheme. The daisy-chain begins on the OUT connector of the Master adapter and ends at the IN connector of the Last Slave adapter.
  • Page 118 Coaxlink Hardware Manual Ready Status LEDs The L1 and L3 LEDs indicate the state of the ready signal on the LAN cable. L1 shows the state of the transmitted ready signal; L3 shows the state of the received ready signal. LED State Indication The adapter is not powered.
  • Page 119 Coaxlink Hardware Manual In the OK 3 situation, the master adapter sends triggers and the ready signal of all adapters is cycling. The yellow/green toggling L2 and L4 LEDs indicate the trigger activity. The yellow/green toggling L1 and L3 LEDs indicate that all adapters are not ready to receive triggers for a significant duration.

  • Page 120: 3303 C2C-Link Ribbon Cable

    Coaxlink Hardware Manual 5.3. 3303 C2C-Link Ribbon Cable 3303 C2C-Link Ribbon Cable is an accessory product used for Intra-PC C2C-Link interconnection. 3303 C2C-Link Ribbon Cable assembly The 3303 C2C-Link Ribbon Cable is a 6-conductor 0.05-in pitch ribbon fitted with 4 6-pin female ribbon cable connectors.

  • Page 121: 3304 Hd26F I/O Adapter Cable

    Coaxlink Hardware Manual 5.4. 3304 HD26F I/O Adapter Cable Applies to: The 3304 HD26F I/O Adapter Cable interconnects a 26-pin dual-row 0.1" pitch connector to a 26-pin 3-row female High-density SubD connector fitted into a standard-profile PC bracket.
  • Page 122 Coaxlink Hardware Manual Usage with Internal IO2 connector Applies to: The adapter brings the second set of I/O lines and the +12 V power output to a bracket-mount SubD connector. The pins are assigned as follows: Wire IDC Pin SubD Signal Signal Description Pin #...
  • Page 123 Coaxlink Hardware Manual Usage with Internal IO1 connector Applies to: The adapter brings the second set of I/O lines and the +12 V power output to a bracket-mount SubD connector. The pins are assigned as follows: Wire IDC Pin SubD Signal Signal Description Pin #...

  • Page 124: 3610/3612 I/O Extension Modules

    Coaxlink Hardware Manual 5.5. 3610/3612 I/O Extension Modules Introduction I/O extension modules extend the I/O capabilities of Coaxlink cards having the I/O extension feature. This topic describes two modules: □ 3610 HD26F I/O Extension Module TTL-RS422 □ 3612 HD26F I/O Extension Module TTL-CMOS5V-RS422 NOTE The 3610 and the 3612 I/O extension modules are almost identical! They differ only by the electrical specification of the single-ended outputs:...
  • Page 125 Coaxlink Hardware Manual Product pictures They are powered by the Coaxlink card though the I/O extension cable. 3610 HD26F I/O Extension Module TTL-RS422 3612 HD26F I/O Extension Module TTL-CMOS5V-RS422...
  • Page 126 Coaxlink Hardware Manual General specification configurable mix of 4 types of I/O ports: ● □ single-ended 5 V compliant TTL input □ single-ended 3.3 V LVTTL (3610 only) or 5 V CMOS (3612 only) output □ differential RS-422 input □ differential RS-422 output powered by the frame grabber through the I/O EXTENSION cable ●...
  • Page 127 Coaxlink Hardware Manual Connectors EXTERNAL I/O connector ● □ Robust 26-pin high-density Sub-D □ Compatible pin layout with External I/O connectors of Coaxlink cards for 12 V/GND and signals pairs See also: "3610/3612 External I/O Connector" on page 34 ● INTERNAL I/O connector □...
  • Page 128 Coaxlink Hardware Manual LEDs Activity LED #1 on bracket The ACTIVITY LED #1 is dedicated to the activity of input ports LED State Meaning Green Normal mode - Flashing indicates activity on at least one input. Orange Configuration mode Error - The I/O module is not (yet) controlled by the frame grabber The I/O module is not powered Activity LED #2 on bracket The ACTIVITY LED #2 is dedicated to the activity of output ports...
  • Page 129 Coaxlink Hardware Manual Electrical specifications Product Specification Item Differential I/O "Differential Input/Output" on page 83 "TTL Input/Output (Version 2)" on "TTL Input/5 V CMOS Output" on Single-ended I/O page 88 page 91 Power output "I/O Power Output" on page 80 Power < 5 W consumption...
  • Page 130 Coaxlink Hardware Manual I/O configuration capabilities and constraints Single-ended I/O Differential Group I/O# Input Output I/O# Input Output MIO1 2 x TTL in 2 x TTL out MIO1 MIO2 MIO3 2 x TTL in 2 x TTL out MIO3 MIO4 Group #1 4 x RS-422 in 4 x RS-422 out...
  • Page 131 Coaxlink Hardware Manual The 20 I/O ports are configurable by group. There are 3 groups: □ The group #1 contains 8 single-ended I/O ports named MIO1 to MIO8 OR 4 differential I/O ports MIO1, MIO3, MIO5, MIO7. □ The group #2 contains 8 single-ended I/O ports named MIO9 to MIO16 OR 4 differential I/O ports MIO9, MIO11, MIO13, MIO15.
  • Page 132 Coaxlink Hardware Manual Software configuration IOExtensionModule category of the Interface module provides a set of features to configure the 3610/3612 I/O extension modules: IOExtensionModuleConfiguration to enter/leave configuration mode □ IOExtensionModuleLineSelector to select a MIO to configure □ IOExtensionModuleLineFormat, IOExtensionModuleLineMode □ IOExtensionModuleLineStatus to configure the selected MIO IOExtensionModuleLineToRepair IOExtensionModuleErrorCount...
  • Page 133 Coaxlink Hardware Manual □ IOExtensionModuleVariant...

  • Page 134: 3614 I/O Extension Module

    Coaxlink Hardware Manual 5.6. 3614 I/O Extension Module Applies to: Introduction This topic describes the 3614 HD26F I/O Extension Module - Standard I/O Set accessory. This I/O extension module adds a second standard I/O set of 10 I/O lines and provides an HD26F adapter for the first standard I/O set.
  • Page 135 Coaxlink Hardware Manual Description 3614 I/O extension module layout This I/O extension module includes: □ a PC bracket fitted with two 26-pin high-density female Sub-D connectors named EXTERNAL I/O 1 and EXTERNAL I/O 2, □ a printed circuit board assembly implementing five connectors and the I/O drivers and receivers of the second I/O set, □...
  • Page 136 Coaxlink Hardware Manual Connectors EXTERNAL I/O 1 connector ● □ Robust 26-pin high-density Sub-D □ All I/O lines of the standard I/O set #1 □ Same pin layout as the External I/O connectors of Coaxlink cards See also: "3614 External I/O 1 Connector" on page 36 EXTERNAL I/O 2 connector ●...

  • Page 137: Custom C2C-Link Ribbon Cable Assembly

    Coaxlink Hardware Manual 5.7. Custom C2C-Link Ribbon Cable Assembly Assembly instructions of a custom-made IntraPC C2C-Link interconnection. Custom C2C-Link Ribbon Cable Assembly The cable assembly is composed with: ● A piece of a 6-conductor 0.05-in pitch ribbon cable. For instance: Belden’s (9L280XX Series). Two or more pieces of a 2 x 3-pin female ribbon cable connectors.

This manual is also suitable for:

Coaxlink duoCoaxlink quadCoaxlink quad g3Coaxlink quad g3 lhCoaxlink quad g3 dfCoaxlink quad 3d-lle ... Show all

Table of Contents