Presetting Stations - Aiwa LCX-350 Operating Instructions Manual

PRESETTING STATIONS
- o–9,
+10
-
BANDI
MODE
TUNER
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly,
1
2
3
Press the TUNER button to select a band, and
press the <+ or - button to select a station,
Press the 11 button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
II
Preset number
Repeat steps 1 and
2.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
7 Press the BAND/MODE TUNER button to selecl a
band.
2 Press the numbered buttons to select a preset
number.
Example:
To select preset number 10, press the +10 and O buttons,
Selecting a preset number on the main unit
Press the TUNER button to select a band, Then, press the ~>
button repeatedly.
Each time the button is pressed, the next higher number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the button, and press the II button within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one,
nm
Each band can only store a maximum of 16 preset stations.
ENGLISH 8