Description; Introduction; Packing List; Optional Accessories - AKG GB 40 GUITARBUG User Instructions

Hide thumbs Also See for GB 40 GUITARBUG:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10

2 Description

2.1 Introduction

Thank you for purchasing an AKG product. Please
take a few minutes to read the instructions
below carefully before operating the equip-
ment. Please keep the Manual for future refer-
ence. Have fun and impress your audience!

2.2 Packing List

1 GB 40
1 long
1 AAA size
trans-
adapter
dry bat-
mitter
plug
tery
• Check that the package contains all the parts
listed above. If anything is missing, please con-
tact your AKG dealer.
12

2.3 Optional Accessories

• For optional accessories, refer to the current
AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
2.4 Description
The GB 40 is a WMS 40 microtools Series minia-
ture transmitter that has been specifically designed
for electric guitars and basses but is also suited for
keyboards.
The transmitter features a permanently attached,
swiveling 1/4" jack plug that allows you to plug the
transmitter directly into the output jack of your
instrument. A built-in spring presses the transmit-
1 black bat-
ter against the instrument to hold it securely in
tery com-
place. The bottom of the transmitter is fitted with a
partment lid
soft plastic pad that will leave no trace on the
instrument.
The GB 40 operates on a single fixed, quartz stabi-
lized carrier frequency in the 710 MHz to 865 MHz
UHF band and uses a permanently attached flexi-
ble antenna.
The color of the battery cover indicates the carrier
frequency of your transmitter (refer to the Manual
Supplement). You can replace the color code bat-
tery cover with the supplied black replacement
cover.
2.5 Controls (refer to fig. 1)
1 ON/MUTE/OFF: This slide switch provides
three positions:
ON: Power to the transmitter is on.
M: The signal delivered by the microphone is
muted while power and the RF carrier frequen-
cy remain on. This prevents the receiver re-
spond ing to interference from other transmitters.
OFF: Power to the transmitter is off.
2 Battery compartment for one 1.5-V AAA size
battery (supplied).
3 Status LED: Indicates battery status.
LED flashes momentarily upon switching ON
and extinguishes: battery is OK.
LED is lit constantly: battery will be dead in
about 60 minutes.
GB 40 guitarbug

Advertisement

Table of Contents
loading

Table of Contents