GE Hotpoint Spacemaker GSM2260NSS Installation Instructions Manual page 10

Dishwasher Installation
is approximately 78" long. If a longer hose is needed,
a 10 foot long hose may be purchased from an
authorized GF appliance dealer. The 10 foot long
hose is part number GPF10S.
Hose Stop Do not use
this port if
presen_
Hose Clamp
STEP 9: INSERT DRAIN HOSE AND POWER
CORD, IF USED, THROUGH CABINET
• Upright the dishwasher and position it in front of
the cabinet opening.
• Insert the drain hose into the hole previously drilled
in the cabinet wall.
• If a power cord is used, guide the end of the cord
through a separate hole cut for the power cord.
The power cord should be routed directly to the rear
of the junction box avoiding contact with the door
spring and other dishwasher components.
Figure M
Drain Hose Collection Chamber
Drain Port
Tip: Avoid unnecessarg service charges for drain
issues
Make sure the drain hose connection is leak free
and the hose is routed through the strain relief so
it will not kink when the dishwasher is installed into
the cabinet.
STEP 8: POSITION WATER LINE AND
POWER SUPPLY
• Position the water supply line and house wiring on
the floor of the opening to avoid interference with
the base of dishwasher and components under
the dishwasher.
1
_Water
Line Supply
Figure N
Tip: Avoid unnecessarg service charges for no fill,
drain, or noise concerns
Position utility lines so they do not interfere with
anything under or behind the dishwasher.
STEP 10: INSTALL OPTIONAL GPF65 SIDE
MOUNT BRACKETS
Skip this step if the underside of countertop is
wood or wood like material.
• Purchase and install the GPF65 side mount bracket
kit if the underside of counter is granite or a
similar material that will not accept wood screws.
The GPF65 kit is available from authorized GE
appliance dealers.
• Refer to Figure P and follow the instructions
included in Side-
the kit. Brackets X
Mounting_
Tub Frame
Bracket
Attachment
_ Optional
Screws
Side-Mount
(2 Each
Bracket Kit Figure P
Side)