Advertisement
Quick Links
Advertisement
Related Manuals for thomann the box Pyrit 112 Sub A
Summary of Contents for thomann the box Pyrit 112 Sub A
- Page 1 Pyrit 112 Sub A Active Speaker...
- Page 2 Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 31.10.2024, ID: 351886 (V2)
- Page 3 Table of contents Table of contents General information..........................5 1.1 Symbols and signal words....................... 5 Safety instructions............................. 7 Features............................... 10 Installation..............................11 4.1 Tips on handling speakers......................13 Connections and controls........................14 Technical specifications........................16 Plug and connection assignment....................20 Protecting the environment......................
- Page 4 Pyrit 112 Sub A Active Speaker...
- Page 5 Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document.
- Page 6 General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
- Page 7 Safety instructions Safety instructions Intended use This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
- Page 8 Safety instructions DANGER! Danger to life due to electric current! A short circuit could lead to a fire hazard and risk of death. Always use proper ready-made insulated triple-core mains cable with a safety plug. Do not modify the mains cable or the plug. In case of isolation damage, disconnect immediately the power supply and arrange repair.
- Page 9 Safety instructions NOTICE! Damage to the device if operated in unsuitable ambient conditions! The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient conditions specified in the “Technical specifications” chapter of this user manual. Avoid operating it in environments with direct sun‐ light, heavy dirt and strong vibrations.
- Page 10 Features Features Special features of the device: 12-inch woofer with 4-inch voice coil Class D amplifier Integrated sound processor (DSP) with 3 modes, tailored to the appropriate satellites with midrange speakers and tweeters (Pyrit 10A, Pyrit 12A, Pyrit 15A) Connection options: XLR/6.35-mm jack combo sockets for signal input and XLR panel plug for signal output 1 ×...
- Page 11 Installation Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
- Page 12 Installation NOTICE! Possible property damage to adjacent devices due to magnetic fields. Speakers generate a static magnetic field. This magnetic field can affect other neighbouring units and in unfavourable cases damage them. Ensure that speakers are always a sufficient distance away from sensitive equip‐ ment that may be affected by an external magnetic field.
- Page 13 Installation 4.1 Tips on handling speakers We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐ ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area.
- Page 14 Connections and controls Connections and controls ö MODE SYSTEM T10a T12a T15a CLIP LINE IN A LINE OUT A LINE IN B LINE OUT B & Pyrit 112 Sub A Active Speaker...
- Page 15 Connections and controls 1 [MODE] | Slide switch for selecting the operating mode of the integrated sound processor: [T10a], [T12a], [T15a]. This adjusts the sound characteristic to the satellite speaker used (midrange and tweeter). The yellow LEDs indicate the selected mode. To avoid damage, switch off the device before changing the mode. 2 [PWR] | The blue LED indicates that the power supply is on.
- Page 16 Technical specifications Technical specifications System Active Speaker Amplifier class Configuration Woofer 1 × 12-inch speaker (ferrite) with 4- inch voice coil Input connections Power supply Rubber panel plug C14 Line 2 × XLR/6.35-mm jack combo socket, (balanced) 460 mm Input impedance 10 kΩ...
- Page 17 Technical specifications Max. short-term sound 129 dB SPL pressure level Beam angle 360° Power consumption 200 W Supply voltage 230 V 50 Hz Fuse 5 mm × 20 mm, 5 A, 250 V, slow blow Dimensions (W × H × D) 460 mm ×...
- Page 18 Technical specifications Further information Design Bass reflex Colour Black Housing material Wood Stand flange Remote control High cut Not adjustable Multi-channel power ampli‐ fier Connection X-Over Cover Optionally available (item no. 385905) Pyrit 112 Sub A Active Speaker...
- Page 19 Technical specifications Frequency response LogChirp - Frequency Response 110.0 252.0 CLIO dBSPL 100.0 180.0 90.0 108.0 80.0 36.0 70.0 -36.0 60.0 -108.0 CH A dBSPL 1/12 Octave 48kHz 32K Rectangular Start 0.00ms Stop 682.65ms FreqLO 1.46Hz Length 682.65ms Pyrit 112 Sub A Active Speaker...
- Page 20 Plug and connection assignment Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured. Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’...
- Page 21 Plug and connection assignment 1/4" TS phone plug (mono, unbalanced) Signal Ground, shielding 1/4" TRS phone plug (mono, bal‐ anced) Signal (in phase, +) Signal (out of phase, –) Ground XLR plug (balanced) Ground, shielding Signal (in phase, +) Signal (out of phase, –) Shielding on plug housing (option) Pyrit 112 Sub A Active Speaker...
- Page 22 Protecting the environment Protecting the environment Disposal of the packing material Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
- Page 23 When disposing of the device, comply with the rules and regulations that apply in your country. You can also return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de.
- Page 24 Notes Pyrit 112 Sub A Active Speaker...
- Page 25 Notes Pyrit 112 Sub A Active Speaker...
- Page 26 Notes Pyrit 112 Sub A Active Speaker...
- Page 28 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the the box Pyrit 112 Sub A and is the answer not in the manual?
Questions and answers