BlueAnt BURLEIGH Manual

Buttons

Item	Button	Function
1		Power button - short press to power on/off
2		Mode button - click to change modes
3		EQ Button - Click to change EQ
4		Skip forward button - Click to skip
5		Skip backward button - Click to skip
6		Indicator light
7		Battery Indicator

Item	Button	Function
8		Volume down - Single click or hold Play/Pause button-Click to play/pause, Double Click for
9		Play/Pause button-Click to play/pause, Double Click for SIRI/GOOGLE. Click to answer/end, Double Click to reject call.
10		Volume up - Single click or hold

Behind the port cover

Item	Button	Function
11		MicroUSB Charge slot – please use supplied AC charger and USB cable, charge time up to 3.5 hours. The Burleigh also features an iPhone battery meter.
12		Micro SD card slot – up to 32GB card supported MP3, WMA, WAV, APE,FLAC audio formats, card sold separately
13		Aux in Jack 3.5mm – Aux in cable supplied
14		Carry strap hooks for use with supplied carry strap.

AC Charger

Getting started

Power on/off

Short press button to power on/off the speaker.
The indicator light will flash blue. The speaker has a memory function and when powered will enter the same mode as prior to power off. Each time the speaker powers on it will reset to 25% volume.
After 10 mins with no activity/connection the Burleigh will automatically power off to conserve battery.

Modes

Bluetooth Mode

1. Pairing
   Power on the speaker and enter Bluetooth mode. The light indicator will flash. On your smartphone search Bluetooth devices for the "BlueAnt Burleigh". Once connected the speaker will announce it is "connected" and the indicator light will cease flashing.
2. Music

   	Click to play/pause
   	Click for previous track
   	Click for next track
   	Click to decrease volume
   	Click to increase volume

3. Calls

   	Click to answer an incoming call
   	Click to end the active call
   	Double click to reject an incoming call

4. SIRI/GOOGLE

   Double click to activate/cancel Siri/Google voice dialing

5. Disconnect

   Press and hold to disconnect the current Bluetooth connection. The Burleigh will prompt "disconnected". Then other Bluetooth devices can find and pair with the Burleigh.

Micro SD Card Mode

When you insert a Micro SD Card into the Burleigh it will switch to Micro SD card playback and announce memory card playback Please press the play button to commence playing music from the card.
Please note the Burleigh supports Micro SD cards upto 32GB, FAT32 format and MP3, WMA, WAV,APE,FLAC audio formats:
If you wish to switch modes please press the button.

	Click to play/pause
	Click for previous track
	Click for next track
	Click to decrease volume
	Click to increase volume

Aux in Mode

Use the 3.5mm audio cable included to connect the speaker to an audio source (PC, MP3/MP4, mobile phone). Short press the button to enter "AUX IN" mode (the speaker will prompt "Aux in" mode).
The speaker will play the music from the audio source.

	Click to mute play back
	Click to decrease volume
	Click to increase volume

To change or control tracks please use your music source when in Aux in mode.

EQ

The Burleigh features three different EQs: Standard, Bass Boost, Movies.
Click to change EQ settings.
The default EQ is Standard EQ. This is for use when music is already very Bass heavy and you need to pull it back a bit. Standard EQ is the loudest option. Bass Boost EQ will enhance the level of bass. Movie EQ enables using the Burleigh as a soundbar with low latency playback and the ability to hear the dialogue and all the action without compromise.

SUPPORT

SPLASHPROOF The BlueAnt Burleigh features an IPX4 rating making it splashproof.
For help and support visit: support.blueantwireless.com
Register your Burleigh for updates: register.blueantwireless.com
By using this product you agree to the terms and conditions listed on the BlueAnt website: www.blueantwireless.com

Important Safety Information

PLEASE READ THIS ENTIRE DOCUMENT CAREFULLY, BECAUSE IT CONTAINS IMPORTANT INFORMATION ABOUT THE SAFE USE OF BLUEANT DEVICES

PROTECT YOUR HEARING
BLUEANT DEVICES CAN REACH VOLUMES ABOVE 100 DECIBELS.
PROLONGED USE AT HIGH VOLUMES MAY AFFECT YOUR HEARING CAPACITY AND MAY RESULT IN NOISE INDUCED HEARING LOSS (NIHL). TURN OFF THE POWER TO YOUR DEVICE WHEN NOT IN USE.
Please ensure that the device and any associated components such as ear gels or chargers are stored safely and that any packaging or unwanted contents are disposed of thoughtfully. Do not place the product on the fl oor or leave it in a place where young children could access it, or someone could trip over it.

Using Ear Gels
Your BlueAnt headset will come with ear gels or foam tips that are designed to provide a secure fit in your ear while providing high quality audio.
Ear gels and tips are designed to sit comfortably in your ear and should not be forced into your ear at any time. If you have trouble fitting the ear gel or foam please refer to the owner's manual for correct insertion and usage information.
Always make sure that the ear gel or foam is fitted securely to your device before placing it in your ear.

NOTE THAT NON-COMPLIANCE, MISUSE OR FORCING THE EAR GEL OR FOAM MAY CAUSE DAMAGE TO YOUR EAR CANAL OR EARDRUM, OR MAY OTHERWISE CAUSE BODILY HARM

Smart Practices While Driving
Check the laws and regulations on the use of mobile devices and accessories such as your BlueAnt device in the areas where you drive. Always obey them. DO NOT USE MOBILE DEVICES AND ACCESSORIES IN AREAS WHERE THEIR USE IS PROHIBITED. ENSURE THAT YOUR USE COMPLIES WITH ANY RESTRICTIONS.

• Your BlueAnt device lets you communicate by voice when wireless service is available and safe conditions allow. When driving a car, driving is your fi rst responsibility.
• If you choose to use your Bluetooth device while driving, remember the following tips:
  • Get to know your BlueAnt device and its features such as speed dial and redial. These features help you to place your call without taking your attention off the road.
  • If you receive an incoming call at an inconvenient time, let your voice mail answer it for you.
  • Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffi c or hazardous weather conditions. Rain, sleet, snow, ice, and heavy traffi c can be hazardous.
• Do not take notes or look up phone numbers while driving. Remember that your primary responsibility is driving safely.
• Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking to aware you are driving and suspend conversations that can divert your attention away from the road.
• In the case of fi re, traffi c accidents, medical or other serious emergencies, dial the local emergency number.
• Call roadside assistance or a special non-emergency wireless assistance number when necessary.

Care and Handling

Your BlueAnt Bluetooth device is a precision engineered instrument. To ensure its ongoing performance, you should look after it as you would any quality consumer electronic product, and use it in accordance with the instructions. BlueAnt recommends that you take the following precautions.
Avoid leaving your device in direct sunlight, such as on the dashboard

• or console of a car or truck. Do not leave your device unattended in your vehicle.
• Do not leave your device, or use your device, in any area where the temperature may exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car on a hot day. Remember that on a hot day the temperature inside a closed car may be signifi cantly higher than the outside air temperature.
• Do not leave your device, or use your device, in any area where the temperature is likely to drop below 0 degrees Centigrade (32 degrees Fahrenheit).
• Do not leave your device, or use your device, in any area exposed to humidity, dust, soot, other foreign objects, smoke, or steam as this may cause your device to malfunction.
• Do not use any household or industrial grade detergents or cleaners to clean your device. If your device becomes dirty or smeared, in most instances a wipe with a dry or slightly damp cloth should be suffi cient to clean it.
• Do not leave your Bluetooth device plugged into a wall or carcharger for long periods after it is fully charged. BlueAnt does not recommend long periods of continued charging.
• Before charging your BlueAnt device, make sure that the AC outlet, adaptor and cable are not damaged. If you notice any abnormalities, seek advice from a qualifi ed professional.
• If traveling internationally, ensure that your BlueAnt wall or car power adapter is approved for use in the country where you plan to use it and hat the adapter voltage is suited to the local power supply.
• Should a fault develop with your BlueAnt product, contact BlueAnt for advice on how to proceed. Do not attempt to repair or alter any BlueAnt product yourself.

Approved Accessories

The use of accessories not approved by BlueAnt, including but not limited to batteries, antennas, wall adapters, car chargers, ear gels and foam tips and convertible covers, may cause your BlueAnt device to malfunction or in the case of non-approved electrical accessories may cause the device to exceed RF energy exposure guidelines.
Use of non approved accessories will void your device's warranty. For a list of approved BlueAnt accessories, visit our website at: www.blueantwireless.com

For warranty and technical support please visit
www.blueantwireless.com
or call 1300 669 049
BlueAnt Wireless,
1-7 Weston St, Brunswick, Victoria, 3056, Australia