Jabra Evolve 75 Manual
Also See for Evolve 75:

Advertisement

Jabra Evolve 75 Manual

Welcome

JABRA EVOLVE 75 FEATURES

  • Superior Active Noise Cancellation (ANC)
  • Integrated busylight to enhance your productivity
  • MultiUse connectivity to two Bluetooth® devices, enabling you take calls and listen to music from the same headset
  • HD voice and world class speakers
  • Up to 30 meter/100 feet Bluetooth connectivity

Overview

Overview

*Requires Microsoft Teams headset variant

Included accessories

Included accessories

Replacement accessories are available online at jabra.com/accessories.

Optional accessories


Replacement ear cushions are available online at jabra.com/accessories.

How to wear

Position the microphone close to your mouth (2 cm or 3/4 inch). The microphone is bendable for personal preference.
How to wear - Step 1

Rotate the microphone up to mute, or down to un-mute.
How to wear - Step 2

When the microphone is not needed, rotate it upwards and magnetically attach to the headband.

Replacing the ear cushions

Rotate the ear cushions counter-clockwise and gently pry them off to completely remove them from the headset. To attach the new ear cushions, place them in the same position and rotate clockwise to lock them in place.
Replacing the ear cushions

Do not use or wear the headset when the ear cushions are not attached. Replacement ear cushions can be purchased via jabra.com/ accessories.

Fold-flat storage

The earcups can be folded-flat for easy storage.
Fold-flat storage

How to charge

Using the charging stand

Plug the charging stand into a powered USB port on your PC, docking station, or wall charger, and then dock the headset.

It takes approx. 3 hours to fully charge the headset.

How to charge - Using the charging stand
When the PC is turned off, the headset will continue to charge only when the charging stand is plugged into a powered USB port.

Using the USB charging cable

Plug the supplied USB charging cable into a USB port on your PC, docking station, or wall charger.

It takes approx. 3 hours to fully charge the headset.
How to charge - Using the USB charging cable

Battery status

To hear the current headset battery status, wear the headset and press the Volume up or Volume down button when not on a call or listening to music.
How to charge - Battery status

How to connect

Plug the supplied Jabra Link 380 into a USB port on your PC. The Jabra Evolve 75 and the Jabra Link 380 are pre-paired and ready for use out of the box. The Bluetooth range is up to 30 meters or 100 feet.
How to connect - PC (using Jabra Link 380)

To hear music in the headset you may need to select the Jabra Link 380 as the playback device in your operating system's audio settings.

To manually pair the Jabra Evolve 75 with the Jabra Link 380, download and use Jabra Direct or Jabra Suite for Mac.

PC (using USB cable)

Ensure the headset is switched on, and then plug the headset into a USB port on your PC using the supplied USB cable.

Smartphone

Slide and hold the On/Off/Bluetooth switch in the Bluetooth position for 3 seconds and follow the voice-guided instructions to begin pairing the headset to your smartphone.
How to connect - Smartphone
The Bluetooth range is up to 10 meters or 30 feet (limited by your smartphone's Bluetooth connectivity).

How to use

How to use
*Requires Microsoft Teams headset variant

What the buttons do

RIGHT EARCUP


  • Turn headset on/off
    Slide the On/Off/Bluetooth switch to On or Off

  • Answer call
    Press the Answer/End call button
  • End call
    Press the Answer/End call button
  • Open Microsoft Teams notification*
    Press the Answer/End call button
  • Play/pause music
    Hold (1 sec) the Hold (1 sec) the Answer/End call button button
  • Reject call
    Double-tap the Double-tap the Answer/End call button button

    *Requires Microsoft Teams headset variant

  • Volume up/down
    Press the Volume up or Volume down button
  • Next track
    Hold (1 sec) the Volume up button
  • Previous track
    Hold (1 sec) the Volume down button
  • Battery status
    Press the Volume up or Volume down button, when not on a call or listening to music

  • Mute/ un-mute microphone
    Press the Mute button, or rotate the microphone up/down
  • Turn voice guidance on/off
    Hold (5 secs) the Mute button
  • Siri/Cortana/ Google Now
    Press the Mute button, when not on a call or listening to music

  • Pair Bluetooth device
    Slide and hold (3 secs) the On/Off/ Bluetooth switch in the Bluetooth position

LEFT EARCUP

  • Listen-in on/off
    Press the Listen-in button

  • ANC on/off
    Press the ANC button

Multiple call handling

The headset can accept and handle multiple calls at the same time.

RIGHT EARCUP

  • Put current call on hold, and answer incoming call
    Press the Answer/ End call button
  • Switch between held call and active call
    Hold (2 secs) the Answer/End call button
  • Reject incoming call, and continue current call
    Double-tap Answer/End call button

Voice guidance

The voice guidance can be switched on/off by holding the Mute button for 5 seconds, or by using Jabra Direct software on your PC. (jabra.com/direct).
How to use - Voice guidance

Busylights

The Busylights on the headset automatically light up red when you are on a call to indicate to colleagues that you are busy. To manually switch the Busylights on/off, press the Volume up and Volume down buttons simultaneously.
How to use - Busylights

To de-activate the Busylight function entirely, hold the Volume up and Volume down buttons simultaneously for 5 seconds. De-activating the Busylight function will prevent the use of the busylights.

To re-activate the Busylight function, hold the Volume up and Volume down buttons simultaneously for 5 seconds.

Active Noice Cancellation (ANC)

Active Noise Cancellation (ANC) reduces outside disturbance to a minimum, allowing you to fully focus on your work or call.
How to use - Active Noice Cancellation - Step 1

Press the ANC button to switch Active Noise Cancellation on/off.
How to use - Active Noice Cancellation - Step 2

Listen-in

Listen-in enables you to hear your surroundings without having to take off the headset. Your music and calls will be muted (but not paused) when Listen-in is on.
How to use - Listen-in - Step 1

Press the Listen-in button to switch Listen-in on/off.
How to use - Listen-in - Step 2

Factory reset

Resetting the Jabra Evolve 75 clears the list of paired Bluetooth devices and all personalized settings.

To perform a factory reset, hold the Answer/ End call button and the Volume up button at the same time for 5 seconds.

After the headset has been reset, you will need to re-pair it to the Jabra Link 380, or to your smartphone.
How to use - Factory reset

Software

Jabra Direct

Jabra Direct is PC software designed to support, manage and enable optimal functionality for Jabra devices.
Download via jabra.com/direct

Suite for Mac

Suite for Mac is software designed to support, manage and enable optimal functionality for Jabra devices on Apple computers.
Download via jabra.com/supportpages/jabra-suite-for-mac

Firmware update

Firmware updates improve performance, or add new functionality to Jabra devices.

  1. Connect the Jabra Evolve 75 to a PC using the USB cable, charging stand, or Jabra Link 380.
  2. Install Jabra Direct on your PC, or Suite for Mac on your Mac.
  3. Use Jabra Direct or Suite for Mac to check for the latest firmware updates.

Support

Find support for the Jabra Evolve 75 or read the FAQ at jabra.com/evolve75.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Jabra Evolve 75 Manual

Advertisement

Need help?

Need help?

Do you have a question about the Evolve 75 and is the answer not in the manual?

Questions and answers

Table of Contents