Jabra Talk 2 - Bluetooth Headset Manual

Jabra Talk 2 features

• HD voice
• Maximum comfort EarGels
• Up to 9 hours talk time*
• PowerNap^TM for extended battery life
• A2DP for GPS, music & more
• Bluetooth 4.0

*Phone and network dependent

Jabra Talk 2 overview

Included accessories

Replacement or additional accessories can be purchased online at: jabra.com/accessories

How to wear

Changing EarGels

For the optimal audio experience, try each of the different EarGel sizes. The fit should feel tight and secure in your ear.

Attaching the EarHook

For a more secure wearing-style, try the EarHook. The fit should feel comfortable and stable on your ear. When wearing the EarHook, it is not necessary to use the looped EarGel.

How to charge

The Jabra Talk 2 offers up to 9 hours of talk time.

Simply plug the USB cable into the charging port, and connect the USB cable to a power supply. It takes approx. 2 hours to fully charge the headset.

What the LEDs mean

How to connect

1. Turn on the headset.
2. Press and hold the Answer/end button until the Bluetooth LED flashes blue.
3. Wear the headset, and follow the voice instructions to connect to your smartphone or Bluetooth device.

Jabra Assist app

The Jabra Assist app is a free app that enables you to:

• Get access to user manual and setup guidance
• Locate your headset using GPS
• Read out your text messages*
• Battery meter to track remaining talk time*

*Android devices only

Visit jabra.com/assist for the full feature list.

How to use

Calls & voice assistant

Calls & voice assistant
	Answer/end call	Tap the Answer/end button
	Reject call	Double-tap the Answer/end button
	Activate Siri/ Google Now/ Cortana	Press (1 sec) the Answer/end button when not on a call
	Adjust volume	Tap the Volume up or Volume down button
	Mute/ un-mute microphone	Tap the Volume up and Volume down buttons at the same time

Multiple call handling

The headset can accept and handle multiple calls at the same time.

Multiple call handling
	End current call and answer incoming call	Tap the Answer/end button
	Put current call on hold and answer incoming call	Press and hold (2 secs) the Answer/ end button
	Switch between held call and active call	Press and hold (2 secs) the Answer/ end button
	Reject incoming call, when on a call	Double-tap the Answer/end button

How to reset

Resetting the headset clears the list of paired devices. After resetting, it is necessary to re-pair the headset to your smartphone, or Bluetooth device.

1. Turn on the headset.
2. Press and hold the Answer/end button and the Volume up button, until the Battery LED flashes purple.
   

PowerNap^TM

To extend battery life, the headset will automatically enter PowerNap^TM when the headset is turned on, but has not been used or connected for 1 hour.

To exit PowerNap, simply tap the Answer/end button.

Support

FAQ & technical specifications

View the FAQ and the technical specifications at:
jabra.com/talk2

How to care for your headset

• Always store the headset in the charging case and safely protected.
• Avoid storage at extreme temperatures (above 40°C/14°F or below 0°C/32°F). This can shorten battery life and may affect the headset.