Advertisement
Dirty sensors can affect the Kolibri Bishop performance and cause genuine bills to be rejected. It is suggested that the user performs regular maintenance on the unit to maintain top performance and prolong its service life.
*Do not insert the nozzle more than ¼ inch into the unit as it may damage the sensor mechanisms inside the Kolibri Bishop unit
Refer to the photos below showing the exact location for cleaning the Kolibri Bishop.
Note: Several factors can cause a Kolibri Bishop to not recognize a genuine bill:
Kolibri suggests that the user cleans the unit at least once per week. For heavy use locations and operations, the user may clean the unit daily to avoid heavy buildup that may cause improper operation. When the unit is not in use, Kolibri suggests that the user covers the unit with a dust cover.
If, after cleaning all sensors, this does not resolve the issue, please see the support section on the Kolibri USA website at www.kolibriusa.com, or contact Kolibri Support at support@kolibriusa.com for further troubleshooting.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the BISHOP and is the answer not in the manual?
Questions and answers